Camper Tie Downs Compatible With TorkLift SuperHitch on 2011 Dodge Ram 3500

Question

Question:

Is Item # TLD1102 Torklift hitch compatible with my existing and already installed Item # TLD3109 TorkLift Custom Frame-Mounted Camper Tie-Downs? I have a 2011 Dodge Ram 3500 dually crew cab 4wd long wheel base. Thanks.

asked by: Martin P

0

Expert Reply:

We have tie-downs that are compatible with the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"# TLD1102 that fits your 2011 Dodge Ram 3500, though Rear Tie-Downs # TLD3109 are not.

The tie-downs compatible with the TorkLift SuperHitch Original Trailer Hitch # TLD1102 on a 2011 Ram 3500 dually are the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2120 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3505.

Additionally, since you have a dually you may need the TorkLift Camper Anchor Relocation Kit # TLA7004. You will need to measure from the front of the camper slide-in point to rear anchor point; the kit is needed if that measurement is less than 90 inches.

I have added links to video reviews of these kits for you to check out as well.

expert reply by: Kyle S

0

Paul S.

7/27/2020

I have a 2004 Dodge ram 3500 long bed dually, and I ordered the rear tie downs TLD3109 and it didn't fit because I have an aftermarket Curt class V. Will the TLR3505 fit the 2004 with a class V that isn't a torklift? Thanks,

Reply

Jon G.

8/4/2020

If your 2004 Dodge Ram 3500 has a board or step under the truck bed then you need part # TLD4101 for the front and part # TLR3500 for the rear. If it doesn't have the board or step then you need part # TLD2101 for the front and part # TLR3500 for the rear. Since you have dually you might also need the Relocation Kit # TLA7004 if the distance between the front bumper of your camper and the center of the rear anchor point is less than 90".

Reply

Answer 1

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 2

Your current converter does not have a lithium battery replacement converter section available for it. You would need to completely replace your power center with one like the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger -…

view full answer...

Answer 3

Thanks for the photo, and since your Ford has TorkLift frame-mounted tie-downs that measure 41 inches to the bed, the turnbuckles you will need are going to be from TorkLift. The reason for that is there are no HappiJac turnbuckles that that amount…

view full answer...

Answer 4

The Derringer set you referenced is only available in a set of 4 that has two longer and two shorter turnbuckles but we do have the Torklift Springload part #TLS9050A which is a set of two that has a range of 35 to 45 inches which is similar to the…

view full answer...

Answer 5

I did some checking and TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs - Stainless Steel - Qty 2 Item #TLS9050A has a reach of 35" to 45".

view full answer...

Answer 6

The TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLD2140 and #TLD3113, front and rear will fit your 2020 Ram 2500, tie-down inserts, frame brackets, and all necessary hardware is included. As for turnbuckles there is a wide selection at varying…

view full answer...

Answer 7

Yes. You can use the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V to replace your Magnetek 7345.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Camper Tie Downs Compatible With TorkLift SuperHitch on 2011 Dodge Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching