2020 Ram 2500 Frame-Mounted Camper Tie-Downs and Turnbuckles

Question

Question:

Trying to submit an order for caper tie-downs and turnbuckles. I want to make sure Im not missing anything n our order. We have a 2020 Dodge Ram 2500 with step down under Cab. Right now We have TorkLift Tie Downs - TLD2140 and TLD3113 for front and rear. Do we need to order anything else for the mount? We arent sure which turnbuckles to order, does it matter, and whats the difference between those priced much lower than others?

asked by: Marlayna M

0

Expert Reply:

The TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLD2140 and # TLD3113, front and rear will fit your 2020 Ram 2500, tie-down inserts, frame brackets, and all necessary hardware is included.

As for turnbuckles there is a wide selection at varying price points that will work. The primary difference being features and ease/time to install. The TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs, # TLS9050A, (35" - 45" reach) are a stainless steel single-piece construction that have internal springs helping to reduce stress on tie-down points. This comes in a quantity of 2, be sure to select the correct length.

The TorkLift Locking FastGun Turnbuckles, # TLS9529-2-LK are quantity of 4. These frame-mounted tie-downs are also constructed of stainless steel with quick-release lever features that make it fast and easy to secure your truck bed camper to your vehicle. These turnbuckles extend from 25" to 43". Simply push down on handle once hooks are in place to tighten and pull up to release.

I suggest the TorkLift SpringLoad XL # TLS9050A for price point but still just as quality as the other FastGun option.

expert reply by: Michael R

0

Answer 1

Your current converter does not have a lithium battery replacement converter section available for it. You would need to completely replace your power center with one like the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger -…

view full answer...

Answer 2

Thanks for the photo, and since your Ford has TorkLift frame-mounted tie-downs that measure 41 inches to the bed, the turnbuckles you will need are going to be from TorkLift. The reason for that is there are no HappiJac turnbuckles that that amount…

view full answer...

Answer 3

We have tie-downs that are compatible with the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"#TLD1102 that fits your 2011 Dodge Ram 3500, though Rear Tie-Downs #TLD3109 are not. The tie-downs compatible with the…

view full answer...

Answer 4

The video you're referencing is a review video just going over the product and not actually going over the installation of the product. That being said the tie-downs are for the matching rear tie-downs and shouldn't be on this page unless the…

view full answer...

Answer 5

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Ram 2500 Crew Cab 6.5' Bed Factory Hitch (No Running Boards or Cab Only Running Boards) is part #TLD2140 for the front and part #TLD3113 for the rear. If you don't already…

view full answer...

Answer 6

The Derringer set you referenced is only available in a set of 4 that has two longer and two shorter turnbuckles but we do have the Torklift Springload part #TLS9050A which is a set of two that has a range of 35 to 45 inches which is similar to the…

view full answer...

Answer 7

I did some checking and TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs - Stainless Steel - Qty 2 Item #TLS9050A has a reach of 35" to 45".

view full answer...

Answer 8

The correct TorkLift tie-downs for your 2020 Ram 2500 are the following: Front Steel - #TLD2140 Front Aluminum - #TL94FR Rear Steel - #TLD3113 Currently (July 2020) there are no rear aluminum options.

view full answer...

Answer 9

We do have camper tie-downs that will fit on your 2019 Ram 2500 but since you have the running boards none of the TorkLift Tie-Downs will fit. You could use parts #TLD2140 and #TLD3113 if you removed the running boards (or steps) but since I doubt…

view full answer...

Answer 10

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Ram 2500 Crew Cab 8' Bed is part #TLD2140 for the front and part #TLD3113 for the rear. The tie-downs will work on models with our without nerf bars/running boards so long as…

view full answer...

Answer 11

Yes. You can use the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V to replace your Magnetek 7345.

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...