Trailer Wiring Recommendation for a 1993 Ford F-150

Question

Question:

Why is it that nobody makes a wiring adapter that matches up with the factory trailer wiring harness on a 93 F 150. All the plugs I have seen mate to the vehicle wiring and will not connect to the trailer circuit.

asked by: Alvin

0

Expert Reply:

We do offer a few options for a 4-way flat wiring harness that will match the plug on your 1993 Ford F-150. The options are the Tow-Ready # 118316 or the Curt # C55316. I have provided linkes to either of these options for you.

If you need to install a fully functional 7-way then you can use the # ETBC7. I have included a helpful article and a couple of videos for your reference.

expert reply by: Amanda

0

Answer 1

If your 1993 Ford F-150 already has 4-Way trailer connector, all you will need is the 4- and 7-way installation kit #ETBC7 to add a functioning 7-Way to your truck. This also provides the wiring for a brake controller. I have included some links…

view full answer...

Answer 2

The 4-way of the #C55316 that you referenced will plug into a 5-way like what you have on your trailer, but if you need the fifth circuit for like a reverse lock out solenoid you would also need the adapter #20036. This product will let you run the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 7

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...