etrailer.com Trailer Hitch Installation - 2012 Honda Odyssey Video

I definitely recommend going with a 2 inch receiver, like the etrailer.com #e98862. This will have a higher towing capacity than the 1 1/4 hitches and also gives you more options for accessories like bike racks or cargo carriers. Whereas the hitch…

For your 2016 Honda Odyssey, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75270. This hitch will not require any additional parts to install. It will come with all the hardware, so you just need…

I spoke with Hidden Hitch and you are correct:Hidden Hitch part #70737 was obsoleted in 2009 and replaced with Draw-Tite part #75270. Draw-Tite part #75270 is form/fit/functionally the same as part #70737. There are a few aesthetic differences…

For your 2022 that is NOT a hybrid :) we have the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11525 as a confirmed fit. This hitch has a weight capacity for the tongue and trailer: 200 and 2,000 lbs. respectively. It has a nice…

The etrailer.com Trailer Hitch Receiver #E98853 that you referenced has a tongue weight capacity of 525 pounds (and a towing weight limit of 3,500 pounds). There was a short time where the stickers that came on this particular hitch were incorrect…

Most ball mounts, like the Draw-Tite #2753 can be used in both a rise (upside down) and drop (standard) position. I'm not seeing any Curt ball mount with a part number 45836, but as I mentioned, most ball mounts are designed to be used either…

Sometimes can end up getting bent in shipping which makes the install more challenging. Typically you can bend the hitch back as long as the paint doesn't end up flaking off or creasing as that would indicate fatigue. If the bend is small enough…

The Hollywood Racks Over-the-Top 2 Bike Carrier for Vehicles w/ Spoilers part #HRF2 is a nice choice for the 2015 Honda Odyssey however it is not a good idea to open the rear door with the rack installed. The rack uses the door for stability and may…

To install the etrailer Trailer Hitch #e98862 on your 2016 Honda Odyssey you will put the brackets of the hitch over the flanges you're talking about. Once you torque down the hardware the hitch will be secured to the frame of your vehicle and…

Before we determine that you have the wrong size install bolts you need to make sure that the bolts not fitting isn't due to the weld nuts of your vehicle being dirty/corroded and that is why they won't fit. Typically on vehicles that have…

Yes, you can reinstall the driver side appearance panel on your 2017 Honda Odyssey with the Draw-Tite Max-Frame Trailer Hitch Receiver part #75270. However, you will need to make a very small modification which can be viewed at around the 5:10 mark…

The custom fit receivers we offer do come with the appropriately sized/pitched bolts. If anything we get phone calls where the 1.25 bolts seem too big. If you have any issues trying to get the bolts into the existing weld nuts on the van we recommend…