Could Brophy Camper Tie Downs # TDSF Fit 2011 Year Truck

Question

Question:

Hello was looking at some tie downs for our camper, #TDSF, and it says it will not fit on a truck newer than 2010. I was just wondering why they will not fit my 2011 truck. I like the style of the TDSF ties downs and would like to get them if they will work. Thanks

asked by: Hagen

0

Expert Reply:

The Brophy Camper Tie Downs, # TDSF, are a universal fit kit intended to fit as many trucks as possible. But there is no fit guide available stating which trucks are compatible. It is still very likely that they will fit your 2011 truck but it's hard to say for sure.

Best option would be to compare the dimension picture I attached for this kit to the stake pockets you have to see if they would fit or not.

expert reply by: Jameson C

0

click to enlarge

Answer 1

To install the Replacement Anchor Bolt for HappiJac Truck #LC182852 for the HappiJac Truck-Mounted Camper Tie-Downs #LC182861 follow the instructions below and use the reference picture attached: 1. You'll start by marking a center point from…

view full answer...

Answer 2

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 3

The Brophy camper tie downs, #HSSF, fit most domestic full size trucks, but there is not a specific vehicle list that they will fit. You will have to go by the measurements of the tie downs and the installation instructions to determine if they will…

view full answer...

Answer 4

On the Brophy Clamp On Camper Tie Down part #HSWB the horizontal distance from the beginning of the angled portion of the tie down to the end is 6 inches.

view full answer...

Answer 5

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 6

Based on your measurements I do not see any issues with installing the Brophy tie downs, #TDSF on your 1965 Chevy C-10. The tabs, or spacers if we are talking about the same thing, do not have to be removed but can be. It is the tab at the top, side…

view full answer...

Answer 7

I reached out to Brophy to check into this for you. The Brophy Clamp On Camper Tie-Downs #HSWB are tested on domestic, full size bed trucks only so while these have worked on Toyota Tundras before, the double cab may be a challenge here. The tie…

view full answer...

Answer 8

Yes, the Camper Hold Downs, part number HSSF will work on the 1995 GMC Sierra Pickup. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. When attached the chains are tightened and pressure is…

view full answer...

Answer 9

CR Brophy, the manufacturer of the #HSSF tie downs did not test fit on the 2007 Toyota Tundra, so they can neither confirm or deny the fit. I was told that if the bed is single walled and the lip under the bed side is at least 2 inches wide, the tie…

view full answer...

Answer 10

CR Brophy, the manufacturer of the #HSSF tie downs did not test fit on the 2006 Toyota Tundra, so they can neither confirm or deny the fit. I was told that if the bed is single walled and the lip under the bed side is at least 2 inches wide, the tie…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Could Brophy Camper Tie Downs # TDSF Fit 2011 Year Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching