Fit of CR Brophy # HSSF Truck Bed Camper Tie Downs on 2007 Toyota Tundra

Question

Question:

Will the hssf work on an 07 tundra?

asked by: Ben

0

Expert Reply:

CR Brophy, the manufacturer of the # HSSF tie downs did not test fit on the 2007 Toyota Tundra, so they can neither confirm or deny the fit. I was told that if the bed is single walled and the lip under the bed side is at least 2 inches wide, the tie town should fit (see photo).

Torklift offers tie-downs that are a confirmed fit, you can see the different fits available by clicking the provided link.

expert reply by: Mike L

0

click to enlarge

Answer 1

Yes, the Camper Hold Downs, part number HSSF will work on the 1995 GMC Sierra Pickup. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. When attached the chains are tightened and pressure…

view full answer...

Answer 2

Based on your measurements I do not see any issues with installing the Brophy tie downs, #TDSF on your 1965 Chevy C-10. The tabs, or spacers if we are talking about the same thing, do not have to be removed but can be. It is the tab at the top,…

view full answer...

Answer 3

The Brophy Camper Tie Downs, #TDSF, are a universal fit kit intended to fit as many trucks as possible. But there is no fit guide available stating which trucks are compatible. It is still very likely that they will fit your 2011 truck but…

view full answer...

Answer 4

I reached out to Brophy to check into this for you. The Brophy Clamp On Camper Tie-Downs #HSWB are tested on domestic, full size bed trucks only so while these have worked on Toyota Tundras before, the double cab may be a challenge here. The tie…

view full answer...

Answer 5

Our most economical camper tie downs are the Brophy Camper Hold Downs, #HSSF, and the Stake Pocket Tie Downs, #TDSF. These are universal tie downs designed to fit a number of trucks. I spoke with Brophy and they have not tested these tie downs on a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 11

Hey Chip, so we do have a set of Torklift camper tie downs that fit your 2024 Ford F-350 long bed with side steps and a factory hitch with the part number #TL87CR for the front set and part #TLF3008 for the rear set.

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Fit of CR Brophy # HSSF Truck Bed Camper Tie Downs on 2007 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching