Trailer Hitch for 2019 Toyota RAV4 Hybrid

Question

Question:

2019 RAV4 XLE Hybrid. You mentioned the Adventure, but can you confirm this is the correct part for the model mentioned in the subject as well?

asked by: Matt

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch # DT82QR is a fit for "all styles" of 2019 Toyota RAV4, according to the manufacturer.

This is a Class III hitch with a 2" receiver and 4,500 lb towing capacity and 675 lb tongue weight capacity. It is a bolt on installation so no drilling into your car's frame is going to be needed. It also has a powder coat finish to resist corrosion and comes with a lifetime warranty.

I have added a link to the installation instructions for you to take a look at.

expert reply by: Kyle S

0

Robert K.

3/2/2020

Does wiring harness come with hitch or do you sell that also?

Reply

Chris R.

3/3/2020

Wiring isn't included with the hitch but you can add it with the Tekonsha T-One # 118801. This is a custom harness designed for your RAV4 that will plug into factory ports behind the tail lights.

Helpful Links

Custom-Fit-Vehicle-Wiring/Tekonsha/118801.html

Reply

Robert K.

2/25/2020

My 2019 hybrid rav 4 says 1750 lbs towing capacity. Your hitch shows 4500. That means even though your hitch it rated for that, I still cant tow that with car, right?

Reply

Chris R.

2/26/2020

You are exactly right. You're always limited by your weakest component. So if the hitch itself has a 4,500 pound capacity but your RAV4 has a 1,750 pound towing capacity, you need to adhere to this lower limit.

Reply

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...