Hitch for 2009 Subaru Impreza WRX Hatchback That Fits with Aftermarket Exhaust
Question:
I have a 2009 wrx hatchback but I now have a different straight through exhaust round canister that exits the same location as the stock muffler tip. Is there a class 3 350 TW 2inch available for my car. I am looking for the completley hidden versions.
asked by: Robert
Expert Reply:
All hitch makers base their designs on a vehicle's stock exhaust setup. There are just too many aftermarket items to allow them to do testing to confirm hitch compatibility with a car that has one of these.
Draw-Tite hitch # DT24959 and Curt # C11315 both fit the WRX hatchback with stock single exhaust as long as they are not the STi. EcoHitch # 306-X7261 does not fit your car.
To help you check the fit with your exhaust I took a measurement of the Draw-Tite hitch. I measured from the top of the passenger-side mounting bracket down to the top of the cross tube. Since this hitch bolts to the bottom of the car's frame you can measure the distance from the bottom of the frame down to the bottom of the exhaust canister to see if there is room for it once the hitch is bolted up.
The distance from the top of the hitch mounting bracket down to the top of the cross tube is 6-3/4-inches, as shown in the photo. If your bottom-of-frame to bottom-of-canister measurement is LESS than this the difference will be the clearance between the canister and hitch tube. If you measure a GREATER distance then the hitch will not fit without you modifying the shape of the canister.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 2000 lbs GTW
- 2 Inch Hitch
- Completely Hidden
- EcoHitch
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2"
- Q&A: Hitch For A 2014 Subaru Impreza WRX 5 Door Hatchback With Invidia Exhaust
- Shop: EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Trailer Hitch Fit for 2010 Subaru Impreza Outback Sport
- Q&A: Hitch Installation Instructions for 2012 Impreza Hatchback
- Q&A: Will The EcoHitch Stealth Trailer Hitch Receiver Fit a 2012 Subaru Impreza WRX Aftermarket Exhaust?
- Q&A: Trailer Hitch Options that Fit 2011 Subaru Impreza WRX Hatch with Quad Exhaust
- Q&A: How to Remove EcoHitch from 2009 Subaru Impreza
- Q&A: Is Trimming Rear Fascia of 2014 Subaru WRX Hatchback Required
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Search Results: subaru hitch
- Video: Trailer Hitch Installation - 2015 Subaru Impreza
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Search Results: hitch
- Shop: Roof Rack
- Video: Choosing the Right Brake Controller
- Search Results: bike rack
- Article: Trailer Wiring Diagrams
- Search Results: roof rack
- Article: How to Measure for Trailer Hitch Drop