Replacement Motor for Lippert Stabilizer Jack Part Number 198641

Question

Question:

What is the the part# for just the motor for lci 198641

asked by: Charlie

0

Expert Reply:

The Lippert Components High-Speed Power Stabilizer Jack - 30" Lift # LC298707 is the updated version of the 198641 you have. We have the C-800 Replacement Klauber Motor for Standard Lippert Components Electric Stabilizer Jacks # LC138445 for your stabilizer.

expert reply by: Jason S

0

Answer 1

I was able to cross-reference your part number and the C-800 Replacement Klauber Motor for Standard Lippert Components Electric Stabilizer Jacks #LC138445 is the updated motor for your trailer jack. It will be a direct replacement.

view full answer...

Answer 2

Unfortunately, there are no replacement legs available for the Lippert Power Stabilizer Jacks like #LC298707, you'll need to replace the whole assembly. It's a good idea to replace the whole unit when there is significant damage. I appreciate…

view full answer...

Answer 3

There are not replacement legs available for the Lippert Components High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift #LC369774 which is the same as the 198641 you mentioned. You will need to replace the entire unit. The support arm…

view full answer...

Answer 4

The Lippert Components Power Stabilizer Trailer Jack #LC298707 that you referenced will work as a replacement for your 198641 stabilizer jack. If you use the Linc Analog Remote #LC292614 for your RV then this is compatible with that as well. The part…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 9

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 12

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Replacement Motor for Lippert Stabilizer Jack Part Number 198641

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching