Trailer Hitch, Wiring Harness and Ball Mount Recommendation for 2018 Toyota Corolla

Question

Question:

I have Toyota Corolla 2018, I can pull a jet ski see doo 130??

asked by: Luis

0

Expert Reply:

I took a look at an online copy of the owner's manual for a 2018 Toyota Corolla and it simply states that towing a trailer is not recommended with the vehicle so the decision will ultimately be up to you.

If you do decide to use your '18 Corolla to pull your jet ski you will need a trailer hitch, wiring harness, ball mount and hitch ball. The trailer hitch I highly recommend for your '18 Corolla is the Draw-Tite Trailer Hitch # 24913 because it is a bolt-on installation that will not require drilling into your vehicle's frame to install, as well as Draw-Tite's strong reputation for making premium trailer hitches. This is a Class I hitch with a 1-1/4 inch receiver, has a black powder coat finish to protect it from corrosion and comes with a lifetime warranty.

I have added a photo of the Draw-Tite Trailer Hitch # 24913 installed on a 2018 Corolla as well as a link to a video of this hitch being installed on this vehicle for you to check out.

The correct ball mount for this trailer hitch is the Draw-Tite # 3593 which does come with a pin and clip to keep it secure to your hitch. For a hitch ball, the correct one will depend on the size of your trailer's coupler. You will need either 1-7/8" Hitch Ball # 19256 or 2" Hitch Ball # 19258.

For wiring which will give you a 4-way connector and allow you to power your trailer's lights you need T-One Wiring Harness # 118405; I have attached a link to a video of this harness being installed on a Corolla as well as a link to the installation instructions.

expert reply by: Kyle S

0

click to enlarge

Mike

5/25/2020

Is this same as a hatchback Corolla

Reply

Chris R.

5/28/2020

From what I could find the towing restrictions are the same for the hatchback model. You can also verify this by looking through your copy of the owner's manual.

Reply

Answer 1

It looks like the max towing capacity for your 2008 Toyota Corolla is 1,500 lbs which means your max tongue weight would be 150 lbs. As long as the Harmar Mobility Lift you are looking at is rated for a Class I trailer hitch and the weight of the…

view full answer...

Answer 2

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18 and Curt…

view full answer...

Answer 3

If your Can Am Commander has a 2 inch hitch the hitch extender that would most likely work best for you would be the #HE18. This product has more than enough capacity for your spreader, but you should note that when you use a hitch extender like this…

view full answer...

Answer 4

It is possible to use a hitch extender/adapter in order to fit a bike rack on a vehicle that requires additional clearance due to a rear-mounted spare tire. And you are correct that use of ANY such adapter/extender, including the Hidden Hitch 18-Inch…

view full answer...

Answer 5

I took a look at the online owner's manual for your 2018 Toyota Corolla and it simply states that Toyota "does not recommend" towing a trailer so they do not give any type of towing capacity. The only thing they state is that a load…

view full answer...

Answer 6

Using an adapter like the #HTAD you mentioned is certainly an option. However, using an adapter will cut your tongue weight capacity (maximum amount of weight that can safely be suspended from the hitch) by 50 percent. Instead of a 200 lb tongue…

view full answer...

Answer 7

There is a single option to use a hitch adapter and extender that will work with the Class I, 1-1/4" Curt Trailer Hitch #C11132 that fits your 2003 Chrysler PT Cruiser, the the Brophy Trailer Hitch Receiver Adapter - 1-1/4" to 2" Hitch…

view full answer...

Answer 8

You are correct. Using the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long #HE18 you were looking at will limit the tongue weight rating to 350lbs and a 3500lb trailer weight rating, but also reduces the capacities of your…

view full answer...

Answer 9

The hitches we offer for the Toyota Sienna have a maximum rated tongue weight capacity of 350 lbs. This is true for all model years from 2010 through 2013 (I checked several since I do not know your specific year). I have provided a link to our page…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...