Towing Capacity of 2019 Toyota RAV4 Hybrid

Question

Question:

what is the operating tongue weight for 2019 rav 4

asked by: Al D

0

Expert Reply:

The 2019 Toyota RAV4 Hybrid has a towing capacity of 1,750 lbs so the tongue weight capacity would then be 175 lbs.

expert reply by: Jameson C

0

Answer 1

All of the trailer hitch receivers available for the 2021 Toyota RAV4 will allow you to use the hands-free lift gate option, but you will have to kick to the side of the receiver tube instead of the middle. That being said, I recommend going with the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The trailer hitch I highly recommend for your 2019 Toyota RAV4 is the Curt #C13416 because it is a bolt-on installation that will not require drilling into your vehicle's frame to install and Curt's long-standing reputation for making very…

view full answer...

Answer 4

For your 2019 Toyota RAV4 Hybrid the Curt #C13416 is a fit which also fits the non-Hybrid models as well as the trailer wiring harness #C56434 which is a great option. I really like the Draw Tite hitch because it has great towing capacities and is…

view full answer...

Answer 5

To add a hitch to your 2017 Toyota Highlander, I recommend the etrailer item #e98844. This hitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a 2" receiver. This hitch has a 6,000 lbs towing…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

There are a few trailer hitch options for the 2017 Toyota Rav4. All the available systems are confirmed to fit the Hybrid models as well. I recommend the Curt Class III Round Tube Receiver Hitch #C13149. This is a 2 inch receiver opening with a 525…

view full answer...

Answer 8

When trimming for the Curt Trailer Hitch Receiver part #C13406 I generally use a razor knife. As you can see in the linked video my buddy Ryan used some snips to do the trimming. There really is nothing you can see in passing after installation…

view full answer...

Answer 9

I have a solution for you to add a hitch with a hidden cross tube on your 2017 Toyota RAV4, but the Draw-Tite hitch you were looking at is not a confirmed fit on your vehicle. The best solution for a hidden style hitch is the EcoHitch #306-X7219,…

view full answer...

Answer 10

We can definitely get you setup for towing. This will be a two step process. You will have to install a 4-way connector first, then you would install the 7-pin connector. My first recommendation is the T-One Vehicle Wiring Harness with 4-Pole Flat…

view full answer...

Answer 11

If the rails on the roof of your 2019 Toyota RAV4 were raised rails (you could put your under them) then yes, the Malone roof rack part #MPG201 would fit and work well. But since you said you have flush rails (rails without a gap between them and the…

view full answer...

Towing Capacity of 2019 Toyota RAV4 Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching