Can A Lunette Ring Be Used with the B&W Pintle Hook Mounting Plate
Question:
Looking for a bolt on lunette ring that will work for this hitch.
asked by: Richard
Expert Reply:
The B&W Pintle Hook Mounting Plate part # BWPMHD14005 that you referenced will slide into a 2" receiver tube opening on the tow vehicle. This will then accept a pintle hook so that you can tow a trailer with a lunette ring, not the other way around. Unfortunately, we do not have a lunette ring for this mounting plate as again it is designed to be used with a pintle hook, not a lunette ring. If for some odd reason your trailer has a pintle hook and not a lunette ring then we would not have any options for you besides to replace the pintle hook on the trailer with a lunette ring.
If you are instead referring to a pintle hook then you can use pretty much any one with a 4 bolt mounting pattern as they will all be more or less designed for the 1-3/4" vertical and 3-3/8 horizontal spacing. For this, I recommend the Curt Pintle Hook part # C48210 which has a 20,000 lb weight capacity. I have attached a list of our lunette ring options for you as well but as mentioned none will work with the above B&W Pintle Hook Mounting Plate.
Products Referenced in This Question
Curt Pintle Hook - Bolt On - 20,000 lbs
- Pintle Hitch
- Pintle Hook - Standard
- 20000 lbs GTW
- Bumper Mount
- Plate Mount
- No Shank
- CURT
more information >
Product Page this Question was Asked From
B&W Pintle Hook Mounting Plate for 2" Hitches - 15" Shank - 14 Hole - 16,000 lbs
- Pintle Hitch
- Pintle Mounting Plate
- 16000 lbs GTW
- 2 Inch Hitch Mount
- 14 Holes
- Standard Shank
- B and W
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: B&W Pintle Hook Mounting Plate for 2" Hitches - 15" Shank - 14 Hole - 16,000 lbs
- Shop: Curt Pintle Hook - Bolt On - 30,000 lbs
- Shop: Buyers Products Pintle/Combination Hitch Mounting Kit
- Q&A: Can B&W Pintle Hook Mounting Plate be Used in Rise Position
- Q&A: Mounting Hardware for the Buyers Products 3 Position Pintle Hook Mount Part # 337PM25812
- Q&A: Recommended Pintle Hook And Mount With 8 - 10 Inch Rise
- Search Results: c48210
- Shop: Curt Pintle Hook - Bolt On - 20,000 lbs
- Shop: Buyers Products Pintle/Combination Hitch Mounting Kit
- Shop: Curt Bolt Kit for Flat Mount Lunette Ring
- Shop: Pintle Hook, Bolt-On, 20K
- Q&A: Will Curt Pintle Hook C48215 Fit The B&W Pintle Hook Mounting Plate BMPMHD14005?
- Search Results: bwpmhd14005
- Video: Curt Pintle Hitch - Pintle Hook - Standard - C48215 Review
- Video: Curt Pintle Hook Mounting Plate Review C48239
- Search Results: pintle hook ~ standard
- Q&A: Recommended Pintle Hook Hitch Ball Combo And Adjustable Height Mounting Plate For 2006 Jeep Liberty
- Q&A: Will 20K Pintle Hook C48210 Bolt to B&W Pintle Hook Mounting Plate PMHD14005
- Q&A: Can the B&W Pintle Hook Mounting Plate # BWPMHD14005 be Used in Rise and Drop Configuration
- Video: B and W Pintle Hitch - Pintle Mounting Plate - BWPMHD14005 Review
- Video: Curt Pintle Hitch - Pintle Hook - Standard - C48205 Review
- Video: Curt Pintle Hitch - Pintle Hook - Standard - C48210 Review
- Video: B and W Pintle Hitch - Pintle Mounting Plate - BWPMHD14004 Review
- Search Results: pintle hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Search Results: pintle mounting plate
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Pintle Hitch
