Snap-Loc Truck and Trailer E-Strap System Plus - 2" x 16' - 1,000 lbs

Video Transcript for Review of Snap-Loc E Track - E-Track Straps,E-Track Anchor - SLCERBPP

Today we're taking a look at the snap lock truck and trailer E strap system plus. This kit let's you anchor the included straps wherever you need a tie down point. It allows you to securely anchor the E straps where you need it, whether it's on a cart, dolly, in your pick up, on your truck, trailer, putting it on racks, walls, ceiling and floors. All types of situations and applications that this kit would be really good for. It includes six black E track tie down anchors. Two E straps with ratchets.

Two rings, hooks and hardware. So it comes with 12 Alan screws, 12 flat washers and 12 lock nuts.Now the anchors, that's these right here, these are made from thick 10 gauge steel with durable powder coated finishing. They measure five and three quarter inches long. One inch wide, half inch deep. The mount holes measure five sixteenths by five sixteenths.

And the mount holes are on five inch centers. These feature a maximum load or break strength of 3000 pounds with a safe working load minimum of 1000 pounds. And that's per each anchor.The straps are made of rigid polyester webbing. They feature the built in ratcheting mechanisms. That way you can quickly apply tension and tighten the strap over or around your cargo or gear.

These straps measure two inches wide by sixteen feet long. And on this end here I have it folded up a little bit, but that's an 18 inch lead end. Maximum load or break strength per strap is 4400 pounds. Safe working load minimum is 1467 pounds. And it does come with the sewn on hook and loop fastener for easy storage.You can also use that to secure any excess strap that you might have before traveling down the road.

It also comes with these rings. These rings fit into the anchor slots just like that, snap into place. And they provide tie down points for straps, ropes or cables. That way you can anchor a tie down strap or a rope or whatever very quickly and easily. This has an opening of an inch and a half. So that's the usable space internally. We have that same E track fitting on each end of our ratchet straps as well so they can fit into the slots. And the slots can also accept any E track accessory.We also have these slip on hooks. These can slip onto the E track fitting here on that strap. And simply provide a hanging option as well. It's a double J hook design. Very strong and durable. Everything here is steel. So the ratcheting mechanism, the fittings, the anchors, the hooks, steel. Everything has a protective coating on it to keep it safe from rust and corrosion. And the double J hooks have a really nice soft coating on them so that way they don't scratch or damage anything that they come into contact with.The ratcheting mechanism basically has three positions. So you have your fully closed position. This would be your travel position. You have the nice large release lever. You have your middle position, which is your ratcheting position. And then you have the fully open position which allows you to disengage the tension and loosen the strap. You can do that and completely pull the strap out of the ratcheting mechanism if you want to as well.Nice, easy motion and movement there on the ratchet. So I don't feel any kinking or binding. It feels like a really nice, solid unit. And then everything you see here on the table, it's all made in the USA. That's going to do it for today's look at the snap lock truck and trailer E strap system plus.