Highest Tongue Weight Capacity Trailer Hitch for 2019 Hyundai Santa Fe

Question

Question:

I have a 2019 Hyunda Santa Fe and am looking to add on a trailer hitch. I want something with a high tongue weight capacity because I mostly use it for a bike rack, which is pretty heavy and I have pretty heavy ebikes too, so what can you recommend? I tow on occasion but mostly like to use the bike rack thanks!

asked by: Jensen A

0

Expert Reply:

The trailer hitch with the highest tongue weight capacity that fits your 2019 Hyundai Santa Fe is the Curt Trailer Hitch # C13195 which has a 750 lb tongue weight capacity and 5,000 lb towing capacity. This is compared to the Draw-Tite # 75908 which has a 500 lb tongue weight capacity while sharing its 5,000 lb towing capacity.

The Curt # C13195 is a bolt-on installation that will not require drilling into your Santa Fe's frame to install. This Class III, 2" trailer hitch has a black powder coat finish to protect it from corrosion, is made in the USA and comes with a lifetime warranty. I have added a link to the installation instructions for you to check out as well as a photo a customer sent in of this hitch installed on a 2019 Hyundai Santa Fe.

If you are going to be towing you will need trailer wiring, the Curt T-Connector Vehicle Wiring Harness # CU94FR, in order to power your trailer's lights. I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip.

expert reply by: Kyle S

0

click to enlarge

Answer 1

That is most likely a Tie Down hub which while we don't carry that exact brand we most likely have what you need. Since the stud and bearings need replacing it might make more sense just to replace the hub since idler hubs like what you have are…

view full answer...

Answer 2

The maximum tongue weight rating for this Draw-Tite Trailer Hitch #36407 that you referenced is 300 lbs. The weight of your electric scooter and ramp combined equals 271 lbs, and if that is all the weight that would be on the hitch then yes you would…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Highest Tongue Weight Capacity Trailer Hitch for 2019 Hyundai Santa Fe

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching