Help Picking Out Replacement Hub for TDE 11033
Question:
I filled in what I could for the dimension of my boat trailer hub and axle shaft, I hope this is enough info, I can not see any other markings. I have attached as a JPG: Pontoon trailer- Bearings, Race & Grease seal dimensions.JPG 1) I prefer to get the parts: Bearing, Race & Seal 2) I would also be interested in the whole hub if all the other parts are included
asked by: Greg V
Expert Reply:
That is most likely a Tie Down hub which while we don't carry that exact brand we most likely have what you need. Since the stud and bearings need replacing it might make more sense just to replace the hub since idler hubs like what you have are pretty inexpensive.
Can you get me the bearing numbers or the dimensions of the spindle where the bearings and seal ride?
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Front Mount Hitch
- Shop: Gooseneck Hitch
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Wiring
- Search Results: tjd~12000~rsp
- Search Results: 23~180~181
- Search Results: treq356
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Search Results: k71~630~00
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Ford Replacement OEM Tow Package Wiring Harness, 7-Way
- Shop: CURT Dodge OEM Harness Adapter
- Search Results: 57300
- Search Results: ramp torsion springs
- Shop: EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Search Results: eh37fr
- Shop: Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Shop: Vehicle Tow Bar Wiring
- Q&A: Highest Tongue Weight Capacity Trailer Hitch for 2019 Hyundai Santa Fe
- Shop: Ladder Rack
- Shop: Vehicle Sway Bars
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Q&A: Spindle Recommendation for a Square 2x2 Axle
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Article: How to Measure a Trailer Axle
- Q&A: #84 Spindle for 3,500 lb Axle
Greg V.
9/28/2017
I filled in what I could for the dimension of my boat trailer hub and axle shaft, I hope this is enough info, I can not see any other markings. I have attached as a JPG: Pontoon trailer- Bearings, Race & Grease seal dimensions.JPG 1) I prefer to get the parts: Bearing, Race & Seal 2) I would also be interested in the whole hub if all the other parts are included