Curt Trailer Hitch Installation - 2018 Ram 3500 Video

The confusion is that the two answer pages have two different hitches they are referring to. The #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches. I attached a picture that has…

The best trailer hitch option we offer for a 2003 Chevrolet Silverado 2500 8' Bed with Service Body is the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25187. This hitch is designed for models with a deep drop tube bumper so it will have…

I can tell you how far the Curt #C15400 extends out from the frame and you can use that to determine the measurement to the end of the service body. We don't have information on the RKI S6080 or a way to determine that distance otherwise. The…

The Curt Trailer Hitch Receiver part #C15400 and the Curt Trailer Hitch Receiver part #C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing…

Both of the Curt hitch receivers have the same bolt hole measurements. It's 9 inches from the first hole (Closest to the front of the truck) to the second hole and 5-1/2 inches from the second to the third. There's 39 inches across from hole…

I called my contact at Curt to confirm these measurements on the Curt #C15313 trailer hitch for you. The width of the hitch from center to center of the bolt holes measures 38-7/8 inches. The top of the receiver to the mounting holes measures 5-7/16…

From the underside of the frame to the top of the crossbar tube would be 5.13 inches, and from the underside of the truck frame to the lowest point on the hitch, which is the bottom of the side plates, is 9.83 inches. You can see these dimensions on…

We haven't had the chance to install the Curt Class V Trailer Hitch Receiver #C15703 on the 2008 Chevy Silverado 2500 so I don't have exactly how far beneath the bumper the receiver will sit, however I did go out to our warehouse to take a…

The Curt Class V Trailer Hitch, #C15313, was designed to fit the 2500 HD models of the 2005 Chevrolet Silverado, but it has not been confirmed to fit the cab and chassis models like your service body truck. The important factor to consider is the…

I spoke to my contact at Curt and he informed me that the Curt hitch #C15317 center section measures 31-5/8 inches. The center to center mounting hole width with the flanges attached is 34-7/8 inches. He also informed me that the flanges on the…

Since your truck frame is 34 inches from outside to outside that means that it originally was a cab and chassis truck. I have a solution for you, but it will require you drill some holes in the frame. The Curt hitch part #C15400 has a drop of 6-1/4…

The Valterra RV Water Tank #R8042 has 6 ports (3 on each side) to allow for different ways to mount your tank. One hole is already cut out with a red plug but the rest would require you to drilling out the hole before attaching your plumbing to the…