Does Draw Tite Front Hitch # 65063 Come with Install Hardware

Question

Question:

does it come with mounting hardware

asked by: Bill

0

Expert Reply:

Yes, the Draw Tite hitch part # 65053 that you referenced does come with all of the install hardware needed. I attached a picture of what it comes with for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, the front hitch part #65053 does fit a 2019 Ford E-450 cutaway RV like what you have. The chassis has been the exact same and won't be changing until 2021 models so it will fit your 2019.

view full answer...

Answer 2

Yes the front hitch #65053 that you referenced is a confirmed fit for your 2021 Thor Outlaw 29j that is built on a E-450 cutaway chassis. I attached an install video for this front hitch on a similar RV as yours for you to check out as well.

view full answer...

Answer 3

EcoHitches like #306-X7900 are typically a more expensive brand than others like Draw Tite. This is mostly due to fact they are Made in the USA and only made from recycled materials (hence the name) which adds a bit of cost. They typically have…

view full answer...

Answer 4

You are correct that any trailer tire, regardless of size or weight rating, must be inflated to the maximum psi pressure that is indicated on the tire's sidewall. A tire can deliver its rated performance only when fully inflated to the…

view full answer...

Answer 5

Most of our sidewind trailer jacks have handles that can be removed. For example, Bulldog sidewind jacks, like #BD182415, and Pro Series sidewind jacks, like #PS1400960376, are attached by a vertical clevis and pin. The Fulton F2 jacks like the…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Does Draw Tite Front Hitch # 65063 Come with Install Hardware

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching