Recommended Trailer Hitch Receiver for 2018 Chrysler 300C

Question

Question:

What trailer hitch do you recommend for a 2018 Chrysler 300C?

asked by: Chad

0

Expert Reply:

For your 2018 Chrysler 300C, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76145. This is a 2 inch receiver that is rated for up to 675 lbs tongue weight. I've attached a video of this installation to assist. The plastic underbody panel will be permanently removed with this installation.

If you will be towing with this trailer hitch, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118658. This harness will connect to your factory wiring harness located behind the tail lights and will draw power directly from your vehicle battery to protect your factory wiring and electronics. I've attached an article to assist with routing that wire.

For your ball mount recommend the B&W Tow & Stow 2-Ball Mount # BWTS10035B for an adjustable ball mount compatible with many trailer coupler heights and having a nice clean storage option to protect your shins. If you want more of a basic ball mount, I recommend the etrailer.com Ball Mount Kit for 2" Hitches # 989900 which comes with two ball mount options and two hitch ball options. This kit has a storage bag for the parts when not in use. If you want a locking hitch pin to protect your investment I recommend # e98880.

expert reply by: Jason S

0

Answer 1

The trailer hitch options for a 2019 Chrysler 300 don't require drilling, they install via pre-drilled holes in the frame. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part #76145 which has the larger class III, 2" receiver…

view full answer...

Answer 2

The ground clearance for the Draw-Tite Max-Frame Trailer Hitch Receiver part #76145 on your stock 2019 Dodge Charger RT is about 8-1/2 inches from the lowest point of the hitch (the bottom of the safety chain loops) to the ground. In the image I…

view full answer...

Answer 3

For a 3-bike platform rack the Kuat Transfer part #KU24FR would be a great option. We had the chance to test fit this rack on a similar 2015 Chrysler 300 and it fit and worked well. Check out the review video I attached that shows this. Platform bike…

view full answer...

Answer 4

In order to install a trailer hitch on a 2019 Dodge Challenger with aftermarket exhaust, the best option we have for you is the Curt Trailer Hitch Receiver part #C13236 not the Draw-Tite Max-Frame Trailer Hitch Receiver part #76145. The Curt hitch as…

view full answer...

Answer 5

For your 2018 Dodge Charger the trailer hitch I recommend is the Draw Tite part #76145 because it has a 2 inch opening which means it the best towing capacities and because more hitch accessories are made for this size. I attached a picture that…

view full answer...

Answer 6

In regards to the Draw-Tite Max-Frame Trailer Hitch Receiver part #76145 which is a confirmed fit for a 2018 Chrysler 300 (All Models), the mounting holes are about 41" apart on center which I think is what you are asking for. If not, please…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Recommended Trailer Hitch Receiver for 2018 Chrysler 300C

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching