Recommended Ball Mount for 13 Inch Drop on a 2017 Ram

Question

Question:

2017 Ram My top of receiver measures 25,my trailer at level measures 12 to bottom of coupler on trailer when it level,what should I use.

asked by: Matt

0

Expert Reply:

If you are measuring from the inside top of the receiver to the bottom of your coupler then you have a 13 inch drop. I've attached an article to help, but have also included a photo for fast reference.

That is a significant drop, so you can use one of the following:

Gen-Y Adjustable 2-Ball Mount - 2" Hitch - 12-1/2" Drop - 10K # 325-GH-316
Gen-Y Adjustable 2-Ball Mount - 2" Hitch - 12-1/2" Drop - 16K # 325-GH-516
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 15" Drop - 10K # 325-GH-317

The closest we have in a fixed ball mount is the Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs # AMSC12. This capacity is significantly less, but the ball mount does have the polyurethane shock absorber integrated. You will need a hitch ball like # C40007 with this ball mount.

With any of these options, I also recommend the locking pin # e98880 to secure your investment.

expert reply by: Jason S

0

click to enlarge

Answer 1

Our longest drop hitch for a 2" receiver is going to be the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item #325-GH-318. This adjustable ball mount has a 17-1/2" drop and a 10,000 lbs capacity like the Gen-Y Adjustable…

view full answer...

Answer 2

The Draw-Tite Front Mount Trailer Hitch Receiver part #65063 is an excellent option to haul a bike rack around with a 2018 Ram 3500. That said, the trailer hitch installs inside the front bumper so when using a bike rack there is a chance it could…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...