Optronics 12V RV LED Wall Light - 3-1/2" Tall - Black
(6 reviews)
Price: $25.12
In Stock
Optronics 12V RV LED Wall Light - 3-1/2" Tall - Black
Item # ILL30CBB
Our Price: $25.12
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (6)
- Q & A (0)
- Videos (1)
- Photos
Optronics RV Interior Lights - ILL30CBB
- Reading Light
- LED Light
- Surface Mount
- Switch
- 12V
- Black
- Optronics
Tilt this energy-efficient, LED wall light up and down to brighten up a dark hallway or add stylish, accented light around furniture. Light turns on and off with the built-in dial on the back of the shade.
Features:
- Wall lamp is perfect in walkways, beside the bed, or above the couch in your RV
- Tilting shade angles the light up and down
- Ratcheting design secures the light in place, even over rough terrain
- Energy-efficient, cool white LED lasts longer and burns brighter than incandescent bulbs
- Built-in dial on the back of the shade turns the light on and off
- Black finish and trim ring provide a clean, finished look
- Bolt-on installation onto an interior wall - hardware not included
- 2-Wire design - black for ground and red for power
Specs:
- Overall dimensions with trim ring: 3-1/8" diameter x 3-1/2" tall
- Light shade length: 3-1/2"
- Mounting hole spacing (center to center): 2"
- Power draw: 0.248 amps at 12.8 volts
- Number of LEDs: 1
- Lifetime warranty on LEDs
Need to brighten up your hallway for those late-night bathroom breaks or snack times? Or perhaps you simply just want to upgrade the accent lighting near your furniture? This RV reading light has a cool white LED that is bright enough to light up your RV's walkway, bedroom, or other living space. And you can use the tilting, ratcheting shade to angle the light up and down and make sure it's secure in place, even over the roughest terrain.
The LED is more energy efficient, lasts longer, and burns brighter than lights with incandescent bulbs. You won't have to worry about dealing with bulbs that have brittle filaments. And because LEDs draw minimal power, the light won't drain your battery or overload your circuits.
Surface-Mount, Bolt-On Installation is Easy
This wall light is incredibly easy to install either as an upgrade or a replacement of your existing light. Using hardware (not included), bolt the light down onto an interior wall of your RV or camper. The light can be turned on and off with the built-in dial on the back of the shade. The 2-wire design hooks up to ground (black wire) and power (red wire).
ILL30CBB Optronics 12 Volt RV LED Wall Sconce - Wall Mount - Black
Alternate part number: ILL-30CBB
California residents: click here
Video of Optronics 12V RV LED Wall Light - 3-1/2" Tall - Black
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics RV Lighting - Ceiling Light - ILL30CBB Review
Today we're going to be taking a look at part number ILL30CBB. This is the Optronics LED RV Bullet Light. It's going to feature a ratchet motion design, so the light is going to move into position and it's going to stay put even during travel over bumpy roads. It just rotates forward and backwards. I'm showing you the full extent of the rotation, it does not rotate side-to-side. It's going to feature a long-lasting LED. It's going to be a great replacement for incandescent lights.
The LED is going to optimize your light output, you don't have to worry about replacing any bulbs or brittle filament. The LED system is more efficient, so it's going to provide brighter light with using less power. The lens on the bullet light is lightly frosted. It's going to feature a black housing. Right here you're going to notice this is just our trim right. You can see how that moves.
The trim right is going to cover the mounting fasteners to provide a smooth, finished look. To snap them into place, you just line up the clips with the grooves, just like that, and then give it a small rotation and it's going to secure in place covering up those nine locations. You can see down here you're going to have three mount holes. It's also going to expose the two wires. You're going to have a red wire and a black wire. The red wire is going to be for power and your black wire is going to be for your ground.
Here at the back this back portion rotates, that's going to be your on and off function. It's got the little on and off indicator here on the top of the housing. That's how you control the operation of the light. It's going to contain one diode or one LED. The overall diameter width of the trim ring, measuring from edge to edge, is going to be 3-1/8". The overall height is going to measure about 3-1/2".
The overall length of the actual bullet portion of the light is going to be 3-1/2" inches. The diameter, this portion here, is going to be right at 2". Again I told you it's going to have three mount locations here on the bottom. The distance that we have between the two mounting holes, going center on center, is going to be 2". It's going to be the same between all three mount locations. So 2" center on center. This is going to have a power draw of 0.248 amps at 12.8 volts. It is a surface mount installation and it's going to feature a lifetime warranty on the LED. I want to go ahead and hook it up to our external power source, that way you can see what it looks like with power running to it. We'll also be able to turn off our overhead lights. That way you can see it in a low-light setting. Again the black wire is going to be the ground connection. The red wire is going to be for power. You can see there it sends out a nice consistent LED signal. The lens allows a lot of light to come through, it's going to distribute the light evenly. Then we've got the on and off function back here, all you got to do is rotate that back portion of the housing. It's got a really nice, quick response time. That's going to do it for today's review of part number ILL30CBB. This is the Optronics LED RV Bullet Light. .
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Optronics 12V RV LED Wall Light - 3-1/2" Tall - Black - ILL30CBB
Average Customer Rating: 4.3 out of 5 stars (6 Customer Reviews)
Tilt this energy-efficient, LED wall light up and down to brighten up a dark hallway or add stylish, accented light around furniture. Light turns on and off with the built-in dial on the back of the shade.by: Steve/Karen03/14/2013
Seems like a well built light. Kind of confusing on the wiring, Red is set up as to look as its the ground (because of what looks to be a grounding tab on base), but really is the power wire and the White wire (that is going into the light itself) is the ground wire. I point this out, because this light will NOT find its own priority, it must be hooked up correctly... With that said, not sure how I feel about the Red power wire not being internally protected (and I will have to do more testing to make sure the "base" is not powered, that would mean a possible short if the base/stud screw is grounded). Also, we will see how the trim ring holds up, the tabs that hold it on are not the best. With the things I pointed out, I don't feel giving it more then a 3 would be appropriate.
by: Mel S06/20/2014
Very Useful in my Trailer, and the light is bright.
Mel S.
6/20/2015
The Lights are still working, very bright , easy to install. I very strongly advise anyone who needs quality lighting to take a look at this brand.
by: Dave08/31/2016
Easy to install work great
by: Terry09/12/2022
by: John 07/17/2021
by: Michael 02/10/2021
6
6
See what our Experts say about this Optronics RV Interior Lights
- Adding LED Lights to Interior of 2012 Lance 1685 CamperThere are a great many flush-mounted LED light options for your 2012 Lance 1685 Camper, some of which have a dimmer. I have added a link for you which has our selection of available interior, flush-mounted LED lights. From there you can choose from the type of light you want, the dimensions and even the base color. For example, there is the Optronics Bullet Light # ILL30CBB which has a 3 inch diameter lens and a black housing
view full answer... - Reading Light in Color Other Than BlackThe LED RV Bullet Light # ILL30CBB does only come in black, but there are other reading lights which do have a different finish. None come in off-white or cream but there is the Gustafson RV LED Reading Light w/ Button # 277-000490 which is "Satin Nickel". I have added a link to our entire selection of reading lights for you to check out.
view full answer... - Where is the Switch on the LED RV Bullet Light ILL30CBB, How Does It Mount and Can It MoveThe built in switch is on the top of the light assembly. If you rotate it clockwise so that the white indicator is above the word ON the light will come on and then if you move it over to off it will turn off. Underneath the trim ring that is on the base of the light is 3 mounting holes that you can run screws through. The head of the assembly can be pivoted to point the light in different directions if needed. I attached a review video for this light for you to check out as well.
view full answer...
- How Many Lumens Does the LED RV Bullet Light ILL30CBB Put OutThe LED RV Bullet Light part # ILL30CBB puts out around 280 lumens which is the only measure of luminosity that we have. I was able to determine the lumens using formulas to go from amps to watts and then from watts to lumens. The amp rating of 0.248 amps is the baseline.
view full answer...
Do you have a question about this RV Interior Light?
Info for this part was:
Written by:
Tyler C
Expert Research:
Jameson C
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Stevekaren
4/1/2013
Just a correction to my above review... Wire color mess up, I typed White, but should have said... Black wire that is going into the light itself is the ground wire.