Trailer Hitch Recommendation for a 2015 Jeep Cherokee Trailhawk

Question

Question:

I want a receiver that DOES come through the rear fascia, at Knee height. Not to impede my departure angle. Nothing lower than my duel pipes. Does it exist?? There is a panel that looks to be removable, in said fascia. I want to tow a utility trailer with my ATV or my cycle. Class 2 hitch would be adequate.. correct?

asked by: Blane M

0

Expert Reply:

The closest thing we have to that is the Curt Trailer Hitch Receiver # C13172. It comes through the fascia but sits slightly below the dual exhaust on a 2015 Jeep Cherokee as you can see in the attached picture and installation video.

This is a Class III trailer hitch with a 2" receiver which is best for towing and for use with other accessories. The hitch has a 5,000 lb trailer towing weight and a 750 lb tongue weight which is over the 4,500 lb towing and 450 lb tongue weight rating that you would have if your Trailhawk came with the 3.2L and the trailer tow package. If you don't have the trailer tow package then those limits are 2,000 lba dna 200 lbs respectively. Please note that you will be limited by the least rated component in your towing setup.

If you don't have the tow package then you will also need wiring. I recommend the Tekonsha # 118605 as it easily installs by plugging in behind your tail lights. We have found the Tekonsha wiring products to be the most reliable that we carry as well.

I also recommend using the ball mount kit # C45036 to complete your towing setup but you will want to refer to the linked ball mount article to ensure that the 2" drop is correct for your application.

expert reply by: Jon G

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...