Will Malone Square Bar Roof Rack # MPG201 Fit a 2010 Toyota RAV4 and a 2011 Toyota Sienna

Question

Question:

I am wondering if the malone square cross bars that fit a 2010 rav4 will fit a 2011 Toyota sienna? Thanks

asked by: Greg

0

Expert Reply:

Yes, the Malone Square Bar Roof Rack Systems # MPG201 for 50" or # MPG202 for 58" will fit both a 2010 Toyota RAV4 (with raised side rails) and a 2011 Toyota Sienna.

expert reply by: Jon G

0

Answer 1

The Malone AirFlow2 Roof Rack, part #MPG215, cannot be cut down. However, these are a confirmed fit for your 2014 Volkswagen Jetta SportWagen. It's designed to fit around raised rails, so the 50" isn't what fits on the rails. It's…

view full answer...

Answer 2

Yes, the Thule Hullavator Pro #TH898 can fit on the Malone Square bar roof rack part #MPG201 you have on your 2006 Mercury Mariner. Thanks for the kind words on our site!

view full answer...

Answer 3

The Thule #TH898 Hullavator would be compatible with the 1-1/4 x 7/8 inch crossbars provided by the Malone #MPG202 roof rack. However, in order for the Hullavator to operate properly, the crossbars will need to extend at least 4 inches past the roof…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 10

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...