Recommended Suspension Enhancement for 2018 Cadillac Escalade

Question

Question:

Do you have Timbrens for my 2018 Escalade? Having some issues with rear sag when I'm loaded.

asked by: Jason M

0

Expert Reply:

We sure do!

For the rear axle of your 2018 Cadillac Escalade I recommend the Timbren Rear Suspension Enhancement System # TGMRYS4. These are confirmed to fit your vehicle and will simply replace the factory bump stops on the frame to provide additional support to prevent the sag you are experiencing and improve the overall performance of your rear suspension. The jounce-style springs have a capacity of 6,000 pounds.

I have attached the written installation instructions that you can check out as well. All the needed hardware will be included.

expert reply by: Chris R

0

Answer 1

I spoke with my contact over at Timbren about helper springs #TGMRYS4. The overall height of the whole assembly is 4-3/4 inches. The spring by itself is 3-3/4 inches. You'll want an inch to an inch and a half of space between the frame/axle and…

view full answer...

Answer 2

For your 2018 Cadillac Escalade the Timbren Rear Suspension Enhancement System #TGMRYS4 will work great. These jounce-style springs are confirmed to fit your vehicle and will simply replace the factory bump stop on the frame to provide additional…

view full answer...

Answer 3

What I recommend is going with the Timbren vehicle suspension #TGMRYS4 (2WD or 4WD)because the hollow rubber springs sit above the axle and they are easy to install. It will also be compatible with your auto-leveling system. Also, the Timbren…

view full answer...

Answer 4

It is not recommended to use any type of suspension enhancement when using a weight distribution system. The two systems will work against each other and would provide an unsafe, unpredictable ride quality. Your best option would be to make sure the…

view full answer...

Answer 5

In terms of capacity, the Timbren Rear Suspension Enhancement System, #TGMRG25C, for a 2003 Chevy Avalanche 1500 has quite a bit more; a total capacity of 6,000 pounds. Compare that to the maximum 1,000 pound capacity of the Firestone Vehicle…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Recommended Suspension Enhancement for 2018 Cadillac Escalade

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching