Dimensions of the Center Hole for Roadmaster Bent Electrical Socket Bracket # RM-910030-5

Question

Question:

What is the diameter of the center hole on the Roadmaster Electrical Socket Bracket RM-910030-5?

asked by: John E

0

Expert Reply:

I went out to the warehouse and pulled a similar part, # RM-910030, to take some measurements. The only difference is that the part I measured is a flat piece and does not have that lip at the top. The center holes are exactly the same.

I took several measurements and have also included a picture showign the measurements. The center hole at the tallest parts is 1-3/8 inches in diameter. And at the widest point is is 1-15/16 inches wide.

expert reply by: Michael H

0

click to enlarge

Answer 1

For a 4-pole round trailer connector and socket, I would recommend looking at the Pollack Heavy-Duty 4-Pole Round Trailer Connector, #PK11409, and the Pollack Heavy-Duty 4-Pole Round Trailer Socket, #PK11410. The connector and socket have a…

view full answer...

Answer 2

I went and pulled the Adapter part #47465, Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket #PK11404 and Pollak Heavy-Duty, 4-Pole, Round Pin Socket #PK11410 to see if they were all compatible and I found that they were. The round 4-way of…

view full answer...

Answer 3

Blue Ox makes a great hitch lock with the part number #BX8858 but another really great option is the Blue Ox Base Plate and Hitch Lock set part #BX88101 which comes with locks for the base plate to the tow bar as well as the tow bar to the hitch all…

view full answer...

Answer 4

The Blue Ox Alpha tow bar, #BX7380, and all hitch mounted tow bars fit in a 2 inch receiver. So you would need a 5/8 inch diameter lock such as #BX8858. A Class II accessory would have a 1-1/4 inch shank whereas Class III accessories have 2 inch…

view full answer...

Answer 5

The Draw-Tite #75679 would be great choice. For the trailer wiring harness, I'd recommend the #118472 T-1 connector. I have two suggestions for how to attach the 4-pole connector to the vehicle. You'll need a long no-drill bracket, part…

view full answer...

Answer 6

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 7

The correct base plate for your 2022 Jeep Wrangler Rubicon is the Roadmaster Direct-Connect item #RM-521453-5. The direct connect arms are removable and will connect to your Nighthawk Tow Bar item #RM-676. I have linked an installation video below to…

view full answer...

Answer 8

You're welcome and thanks again for the pictures! The connector inside your RV is called an OBD2 port and it's used for inspections and other diagnostics. It does not work with anything towing related or a brake system like the Roadmaster…

view full answer...

Answer 9

I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar…

view full answer...

Answer 10

For your RV built on the 2003 Ford E-450 chassis, I recommend looking at the Curt Adjustable Width Trailer Hitch Receiver #C13702. This is a universal, adjustable trailer hitch designed specifically for use on RVs. It can be bolted to the vehicle…

view full answer...

Answer 11

Thanks for the pictures and all the information! Since you have the Falcon 2 Tow bar you can use the Roadmaster Direct-Connect Base Plate Kit item #RM-52927-5 you were looking at and get rid of the crossbar. This kit is confirmed to fit your 2022…

view full answer...

Answer 12

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...