Economical Weight Distribution System for 3,000 Pound Trailer

Question

Question:

Weight Distributing Hitch... for a 2017 Jeep Wrangler. I'm wanting to order one thats not too heavy, The tongue weight of a small trailer is less than 350#. The trailer weight is less than 3000#. What are my choices... Looking for lower priced kits. Prices, part #s and options??? I will hopefully be ordering a hitch...I have a tire on the back bumper. Thanks,

asked by: Barry

0

Expert Reply:

When picking out a weight distribution hitch the most important factor to consider is your total tongue weight. This number includes both the loaded tongue weight of your trailer plus any added cargo you have stored behind the rear axle of your Jeep Wrangler. Ideally this number will fall somewhere near the middle of the operating range for the system you choose.

You mentioned a tongue weight of less than 350 pounds and a total trailer weight of less than 3,000 pounds. If these weights are with the trailer fully loaded I recommend taking a look at the Fastway e2 Weight Distribution System # FA92-00-0600. This is a really nice, economically priced system that features a tongue weight capacity range of 250 to 600 pounds. It will do a great job of evenly distributing weight over the axles of your Jeep and trailer and its integrated 2-Point Sway Control will limit side-to-side movement.

This system includes the adjustable shank so the only thing you will need to add (if you don't have one already) is a compatible hitch ball like the 2 inch # EQ91-00-6080. Pricing information will be listed on the product pages.

I have attached a short video demonstration that you can check out along with the written installation instructions.

expert reply by: Chris R

0

Answer 1

Picking up the correct weight distribution system for your needs isn't as difficult as you might think. The key thing you'll need to know in order to choose the correct system is the trailers tongue weight when it's fully loaded and ready…

view full answer...

Answer 2

The owner's manual for the weight distribution system should have a section that details how to check that the system is setup and adjusted properly. This is usually done using a series of measurements of the tow vehicle loaded/unloaded. I have…

view full answer...

Answer 3

The weight distribution system I recommend for you with your 2006 Honda Odyssey is the Equal-I-zer Weight Distribution System with 4-Point Sway Control #EQ37040ET. This system uses trunnion-style arms that will help with ground clearance, as…

view full answer...

Answer 4

With weight distribution/sway control (WD/SC) systems the best ground clearance generally comes from trunnion-style setups like the Equal-i-zer #EQ37040ET that you referenced. These systems' bars do connect to the side of the head assembly,…

view full answer...

Answer 5

Although not always necessary, it is always a good idea to upgrade the vehicle for towing a heavy load for an extending period of time. In order to tow a 16' camper that weighs roughly 2,500 lbs. when dry, with a 2005 Dodge Grand Caravan, I…

view full answer...

Answer 6

The Strait-Line Weight Distribution System w Sway Control that you referenced is a great system, but as you mentioned it does require drilling. There may also be issues with certain size trailer frames. Therefore, it may not be the best option for…

view full answer...

Answer 7

For your Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37040ET since your tray is right at that 25-32 inches back from the center of your coupler where your brackets need to be, the best solution to use this system is to drill…

view full answer...

Answer 8

When you are trying to get the top towing weight out of your 2016 Honda Pilot, you are wise in looking into a weight distribution system. The way you choose a weight distribution system is based mostly on the total tongue weight. The total tongue…

view full answer...

Answer 9

When choosing a weight distribution system, it is key to know your trailer's loaded and ready to tow tongue weight. To this tongue weight you will need to add the weight of any cargo behind the rear axle in the back of your 2011 Toyota RAV4. Once…

view full answer...

Answer 10

I recommend the Equal-i-zer Weight Distribution System #EQ37040ET for your 1996 Jayco Jay 1207 tent trailer. This system uses a built in 4 point sway control to reduce trailer sway and there is no need to remove any parts before backing up and…

view full answer...

Answer 11

Thanks for the kind words! Before we get into the best weight distribution solution for your needs you should note that the best way to fight sway is in how you load the trailer. If you can move as much weight to the front of the trailer and make…

view full answer...

Answer 12

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...