Curt 5th Wheel Base Rail Kit for 2005 Ford F-350 Long Bed Dually

Question

Question:

Will this fit a 2005 f350 with an long bed and the truck is a dually.

asked by: Jim

0

Expert Reply:

For your 2005 Ford F-350 dually, the Curt Custom Fifth Wheel Installation Kit for Ford - Carbide Finish # C16448-204 or gloss black finish # C16448-104 are confirmed to fit. The long bed and the dual rear wheels do not change the fit on your truck frame.

expert reply by: Jason S

0

Answer 1

The Firestone Ride Rite kit part #F2550 is a confirmed fit for your 1999 Ford F-Series Super Duty and was designed to be compatible with an in-bed fifth wheel hitch rail kit like the Curt that you referenced. You should note that for your truck the…

view full answer...

Answer 2

The Curt Custom Fifth Wheel Installation Kit for Ford - Carbide Finish Item #C16448-204 are rated for a 25,000lbs 5th wheel hitch.

view full answer...

Answer 3

Since your Husky 26k Fifth wheel hitch 31319 fits industry standard rails I recommend the Curt Custom Fifth Wheel Installation Kit for Ford - Carbide Finish #C16448-204 which are confirmed to fit your 2006 Ford F-350 XLT Super Duty and will give you…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 12

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Curt 5th Wheel Base Rail Kit for 2005 Ford F-350 Long Bed Dually

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching