Parts Needed to Tow Trailer with 2007 Toyota Matrix

Question

Question:

towing capacity of a 2007 toyota matrix? best towing equipment... please list everything required ....nothing on it now

asked by: Arnold

0

Expert Reply:

I took a look at the online version of the owner's manual for your 2007 Toyota Matrix and found that it can tow a trailer that weighs up to 1,500 pounds. I do recommend verifying this in your copy of the manual just in case you have a different model.

In order to tow a trailer you will need to start with a trailer hitch. I recommend the Draw-Tite Class I Sport Frame Receiver Hitch # 24812. This custom hitch will use existing holes in your vehicle's frame for a no-drill installation and all the necessary hardware is included.

I have attached an installation video and the written instructions that you can use for reference.

Then for a trailer wiring harness I recommend the Tekonsha T-One # 118386. This will install by plugging into factory ports behind the trim panels in the cargo area on the driver and passenger side. This will provide you with a 4-Way connector to connect with and power a trailer's basic signal lights.

I have again attached the written installation instructions that you can check out.

You will then just need a ball mount like the Draw-Tite Drawbar # 3593 and a hitch ball that is compatible with the coupler on your trailer, such as the 1-7/8 inch # 19256. This particular ball mount features a 2-1/8 inch rise or a 2-3/4 inch drop. I have attached a great article that explains how to choose the best ball mount for your setup if the rise or drop on this unit is not sufficient to tow your trailer level.

I have also included a couple articles on trailer towing that you might find helpful.

expert reply by: Chris R

0

Answer 1

On the 2009 Toyota Camry, all of the hitches available are Class II 1-1/4 inch hitch openings. The hitches will have a 3,500 lb. Gross Towing Weight and a 300 lb. or 350 lb. Tongue Weight. There is not a 2 inch hitch available for your vehicle,…

view full answer...

Answer 2

Yes, you are correct the differences are that on #C12221 the heat shield modification may be required, and lower fascia may need to be trimmed for hitch installation. On the #C12013 a heat shield modification may be required. It does not need a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Parts Needed to Tow Trailer with 2007 Toyota Matrix

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching