Brake Assembly Recommendation for 6,000 lb AL KO Trailer Axles
Question:
What is the difference between part # 23-106-09 and part # 23-106? both say they fit the same sizes, bolt patterns and manufactures of axles. I have ALKO axles with hub #8460 12x2, with 6 x 5.50 bolt circle, with inner bearing 25580 and outer bearing 15123, a 5 bolt flange. Would either brake assembly work? I believe they are 6000lb axles. Have three axles on a Sandstorm toyhauler.
asked by: Shawn
Expert Reply:
The Dexter Electric Brake Assembly # 23-106-09 is similar to the # 23-106 except it is designed to fit both 4 bolt AL KO style bolt patterns as well as the standard 5 bolt patterns seen on most other brands.
Since you have Al KO axles you'd most likely need the # 23-106-09 for the passenger side and then the part # 23-105-09 for the driver side. You would want to check though. Look behind the trailer wheels at the brake mounting flange. If it's 4 bolts with the upper bolts being spaced further apart than the lower bolts this would be a great option.
Products Referenced in This Question
Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Brake Assemblies that Have 4 Bolt Pattern and 12 inch Diameter
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Q&A: Center Hole Diameter of Brake Assembly 23-106-09
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Shop: Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs
- Q&A: Replacement Brake Assemblies For Al-KO Or Hayes 4-Bolt Flange
- Q&A: 4-Hole Spacing Measurements on Dexter 12 x 2 Inch Electric Trailer Brake Assemblies
- Q&A: AL-KO 6k Brake Assembly Recommendation with Offset 4 Bolt Mounting Pattern
- Q&A: Brake Assembly Recommendation for a 6k Dexter Axle with 12 inch Assemblies
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 5,200 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 5,200 lbs
- Shop: Mounting Bolts and Hardware for 12" Brake Assemblies
- Search Results: 23~106~09
- Search Results: 23~105~09
- Video: Dexter Electric Brake Assembly Review
- Q&A: Troubleshooting Weak Braking After Installing New Dexter Electric Brakes on Trailer
- Article: Where to Position the Trailer Axle?
- Video: Titan Adjustable Trailer Coupler - Coupler Only - T4855300 Review
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Search Results: 25580
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Fifth Wheel Hitch
- Article: Trailer Tire Sizing
- Search Results: dust cap
- Shop: Gooseneck Hitch
on Accessories and Parts
