4-Hole Spacing Measurements on Dexter 12 x 2 Inch Electric Trailer Brake Assemblies
Question:
The four bolt holes that are also on the backing plate . I have one that is a 12X2 drums that has the top holes on the backing plate are 3 inches apart and the bottom are 2 1/2 apart and they are 3 7/16 from top to bottom holes . the bolts are 7/16, the hole in the center is3 1/2 I am working on an old 1980 WW stock trailer .
asked by: Alan L
Expert Reply:
The mounting holes (4 hole pattern) on Dexter brake assembly, # 23-106-09, are 3.09 inches on center for the top two holes and 2.55 inches apart on center for the bottom 2 holes. Top to bottom they are 3.40 inches apart on center. The holes can accommodate a 7/16 inch bolt size. So it appears to be a match with the mounting plate you have. The matching left hand assembly is # 23-105-09.
Products Referenced in This Question
Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Brake Assemblies that Have 4 Bolt Pattern and 12 inch Diameter
- Shop: Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Q&A: Center Hole Diameter of Brake Assembly 23-106-09
- Q&A: Replacement Brakes for Dexter Axle 6K Axle
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Search Results: brake shoes
- Search Results: gs~2125dl
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKUBRK-7 Review
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 5.2K to 7K
- Video: Review of Dexter Axle Brake Actuator - Master Cylinder and Pushrod - DX66FR
- Video: Dexter Electric Brake Assembly Review
- Search Results: 23~106~09
- Search Results: 23~105~09
- Q&A: Brake Assembly Recommendation for 6,000 lb AL KO Trailer Axles
- Q&A: Replacement Brake Assemblies For Al-KO Or Hayes 4-Bolt Flange
- Q&A: AL-KO 6k Brake Assembly Recommendation with Offset 4 Bolt Mounting Pattern
- Q&A: Brake Assembly Recommendation for a 6k Dexter Axle with 12 inch Assemblies
- Search Results: lm57048
- Search Results: 12 x 2 brake drum
- Search Results: 4400 lbs axle
- Shop: Suspension Enhancement
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Roof Rack
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: etrailer Electric Trailer Brake Magnet Kit Replacement Review