Do Trailer Drums have to be Machined or Turned when Replacing Brake Assemblies
Question:
When replacing the brake assembly, should the brake drum be turned or machined by a machine shop similar to auto drums? CAN the 8-257 drums be machined at all or is there enough metal to allow turning or machining?
asked by: David C
Expert Reply:
Hubs and drums that can be turned (machined) will have a specification on how much they can be turned cast into the metal of the drum somewhere. Otherwise it is at the brake shop's discretion. Drums do not have to be turned unless there is some kind of problem such as an uneven interior surface where the pads ride.
If you are just replacing the brakes and the insides of the drums appear to be fine then you should not have to have them turned.
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2
- Q&A: Potential Causes for Trailer Hub to Heat Up
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Q&A: Do Trailer Drums have to be Turned when Replacing Electric Trailer Brake Assemblies
- Q&A: What is the Best Grease for Trailer Bearings
- Video: etrailer Electric Trailer Brake Magnet Kit Replacement Review
- Q&A: Trailer Hub Replacement for 2021 Grand Design Reflection 5th Wheel with 5,200 lb Axle
- Video: Dexter Electric Trailer Brake Assembly Installation 23-105
- Q&A: Does Trailer Wheel Hub/Brake Drum Need to Be Replaced if Inside Surface is Grooved
- Search Results: trailer hub and drum
- Search Results: brake drum
- Search Results: dexter 010 019 00
- Q&A: Upgrading From 7K to 8K Electric Brake Assemblies on Trailer for Increased Braking Power
- Video: Review of Lionshead Tires and Wheels - Wheel Only - 274-000039
- Video: Dexter Electric Trailer Brake Kit Installation 23-26
- Article: Most Popular Wheel Bearings
- Search Results: grease seal puller
- Search Results: morryde suspension kits
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Search Results: 12x2 brake shoes
- Search Results: trailer brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Shop: Blind Spot Detection
- Video: HWT Tires and Wheels - Wheel Only - AM22659HWT Review