Timbren Rear Suspension Enhancement System Installation - 2020 Ford F-150 Video

Yes, you'll need to readjust the weight distribution system after installing the Timbren Rear Suspension Enhancement System part #TFR1504E on a 2021 Ford F-150. The reason for this is because the rear end sag will be reduced with the springs…

When installing the #TFR1504E, Timbren recommends putting the rear of the vehicle up on jack stands so the rear axle hangs free. In many cases, installation is easier if you remove the back wheels, it makes everything much simpler to reach. If you…

Yes; when using a weight distribution hitch while towing with your 2019 Ford F-150, using the Timbren Rear Suspension Enhancement System #TFR1504E will help with stability. The weight distribution will help with leveling, but the Timbrens are going…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

While the Timbren Rear Suspension Enhancement System #TFR1504E may be able to technically fit without using the spacer, it will likely not offer you the best performance. It is supposed to be pretty tight and without the use of the spacer, the…

Any time the trailer weighs more than half of the weight of the tow vehicle we strongly recommend a weight distribution system. You'll see improvements in handling, braking, and sway reduction even with a heavier duty truck like what you…

For great rear jounce springs for your 2022 Ford F-150, I recommend the Timbren Rear Suspension Enhancement System #TFR1504E. Apart from the 6,000 pound load capacity, the Timbrens becomes more rigid as more weight is added and results in greater…

I reached out directly to Timbren for you, and they told me the correct fit for your 2021 GMC Sierra 1500 AT4 was indeed the Timbren Suspension Enhancement System #T28MR.

I checked and found the manual for the Lippert Electric Trailer Jack #LC285318 and there was no mention of anything going in the hole beforehand to tighten them. I added a cut out of the manual for you which shows the parts for this jack, and it…

For your 2016 Ford F-150 Lariat 4x4, air springs are the right solution for your concerns. They can be inflated to support the extra load and deflated to 5 psi (not a change in feel) for your daily driving. I recommend the Air Lift LoadLifter 5000…

Yes, I would recommend using a weight distribution hitch with sway control. I am a big fan of Equalizer for their reliability, ease of use, and affordability. It looks like your 2022 E2W Alta 2810KIK TT tops out at 9,597 lbs when fully loaded.…

Yes, for your 2018 Ford F-150 a Timbren like the part #TFR1504E (which is a custom fit for your truck), is exactly what you need. This will give you the rear suspension support you need to greatly reduce sag when you have your truck bed loaded or…