Mounting Bolt Pattern of Buyers Products 30 Ton Heavy-Duty Swivel Type Pintle Hook # 337BP760A

Question

Question:

Mounting bolt pattern not shown or listed. Our current one has 6.50inch bolt pattern. We dont want to weaken metal with extra holes if we can avoid it.

asked by: Fred R

1

Helpful Expert Reply:

The mounting holes of the Buyers Products 30 Ton Heavy-Duty Swivel Type Pintle Hook # 337BP760A that you referenced are 6-1/2 inches apart exactly like what you have so this will bolt right up without requiring you to do any drilling.

expert reply by: Jameson C

1

click to enlarge

Preston P.

5/3/2020

Do you have a ball hitch with the bolt pattern like the swivel style pintle

Reply

Chris R.

5/6/2020

We have quite a few bumper/channel mount pintle hook ball combo options available, but none with a bolt pattern that matches the above mentioned unit. I have copied a link below that will take you to our full selection.

Helpful Links

dept-pg-pintle_hitch-sf-pintle_hook_~_ball_combo-pc-bumper_mount.aspx

Reply

Answer 1

The Replacement Inner Slide Channel for Dexter Model 6 #T4846500183 has a shank that measures 3" wide x 2-1/2" tall to it's a little smaller than the 3" square shank that comes on the Replacement Inner Slide for Demco DA91…

view full answer...

Answer 2

The center hole required for the Buyers Products 30 Ton Heavy-Duty Swivel Type Pintle Hook #337BP760A needs to be 2-1/16". I have attached a picture below of the mounting plate dimensions and hole placement.

view full answer...

Answer 3

From our experience the military trailer you have uses a standard lunette ring so a pintle hook like the Curt #C48005 would work fine.

view full answer...

Answer 4

The best option I have for an adjustable pintle hook that slides into a 2" hitch is the Curt Pintle Hook Mounting Plate part #C48341 with the Curt Pintle Hook part #C48210. I am not aware of any way to use a swivel type pintle hook with a…

view full answer...

Answer 5

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…

view full answer...

Answer 6

I do not have a cut sheet for Buyers 10-hole pintle hook part #337PH55 but the mounting hole diameter measures 0.812". The bottom mounting holes measure 1.062 inches center to center. From the center of the third mounting hole to the center of…

view full answer...

Answer 7

The Brophy Pintle Hook for 2-1/2" Hitches part #BR27FR measures 9" from the center of the pin hole to the center of the U-shape pintle hook. It measures 12" from the center of the hitch pin hole to outer most portion of the pintle…

view full answer...

Answer 8

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

view full answer...

Answer 9

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3…

view full answer...

Answer 10

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 11

Yes, the Sleeve-Lock Trailer Coupler #CTA-196 will fit the channel bracket that comes with the Brophy Lunette Ring w/ 3-Position Adjustable Channel Bracket #BR43ZR. The bolt holes match as well when it comes to size and spacing so you'll be good…

view full answer...

Mounting Bolt Pattern of Buyers Products 30 Ton Heavy-Duty Swivel Type Pintle Hook # 337BP760A

Product Page this Question was Asked From

Continue Researching