Are Dexter Model 6 and Demco DA91 Inner Slides the Same Dimensions

Question

Question:

Looking at item # T4846500183 Replacement Inner Slide Channel for Dexter Model 6 Bolt-On Adjustable-Channel Brake Actuators I see a customer photo shows they used this item as a replacement for a 2010 Schutt M1101 trailer, which is what I am looking to do. I am wondering if item # DM12808-97 Replacement Inner Slide for Demco DA91 Actuators might also work for this trailer. Could you tell me if the Demco slide has the same shank height/width measurements as the Dexter slide? Thanks!

asked by: Josh S

0

Expert Reply:

The Replacement Inner Slide Channel for Dexter Model 6 # T4846500183 has a shank that measures 3" wide x 2-1/2" tall to it's a little smaller than the 3" square shank that comes on the Replacement Inner Slide for Demco DA91 Actuators # DM12808-97.

Since it sounds like you have a Schutt M1101 trailer as well I recommend sticking with the Inner Slide # T4846500183 so you know it will fit.

expert reply by: Jon G

0

Answer 1

The best option I have for an adjustable pintle hook that slides into a 2" hitch is the Curt Pintle Hook Mounting Plate part #C48341 with the Curt Pintle Hook part #C48210. I am not aware of any way to use a swivel type pintle hook with a…

view full answer...

Answer 2

I don't have much info on the Military M101a Trailers but I can see they're A-Frames so assuming it's the standard 50 degree A-Frame the best Lock N Roll setup to use will be the Lock N Roll Articulating Coupler part…

view full answer...

Answer 3

From our experience the military trailer you have uses a standard lunette ring so a pintle hook like the Curt #C48005 would work fine.

view full answer...

Answer 4

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer…

view full answer...

Answer 5

For your 2020 Land Rover Range Rover Sport I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #75229. It has a clean look, the only thing you see once installed is the receiver tube. It has a 800 lbs TW rating, and 8,000 lbs GTW rating. For…

view full answer...

Answer 6

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 7

For mounting the Demco 5-Position Adjustable Channel Bracket #DM13867-52 you will need to source 1/2" grade 5 mounting bolts from your local hardware store. This will allow you to secure the bracket to a 3" wide channel tongue.

view full answer...

Are Dexter Model 6 and Demco DA91 Inner Slides the Same Dimensions

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching