Replacement Landing Gear Legs or Repair Parts for Landing Gear VM900L-068652

Question

Question:

I have a Fulton landing gear and motor system on my 05 keystone high country cougar. My bevel gears on the passenger side striped. Model number of my jack is VM900L-068652. Can you help with replacement jack or Jacks that will work with my gear box and motor. Please give me a price . I bought my fifthwheel hitch from you and works great! Thank you in advance.

asked by: Terry E

0

Expert Reply:

We have repair kits for the VM900L series. The repair kit for the follower leg is # LG-146060 and the repair kit for the lead leg is # LC146059. Replacing the parts is going to be a whole lot less expensive that replacing the legs.

If you want to replace the legs anyway then we have # LG-179014 as the follower and # LG-179013 as the lead leg.

expert reply by: Michael H

0

Answer 1

You should need repair kit #LG-146059 for the lead leg and #LG-146060 for the follower leg. From the picture you sent in I was able to determine that you have a Venture landing gear set VMC900R.

view full answer...

Answer 2

The correct repair kit for the #LG-1 lead leg is part #LG-146059 and for the follower leg it's part #LG-146060. I attached a diagram that shows how these kits will install.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 9

Thanks for all the information! You are correct that is the lead leg because it is closest to the gear and the motor. However, in order to determine which replacement lead leg you need, you'll need to find the model of the landing gear on your…

view full answer...

Replacement Landing Gear Legs or Repair Parts for Landing Gear VM900L-068652

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching