Axle Needed with 89 Hub Face and 74 Spring Center Measurements
Question:
I HAVE AT LIPPERT AXLE BUT MY DIMENSION IS 89" HUB FACE 74" SPRING CENTER SO WITCH ONE IS THE RIGHT ONE CAN YOU HELP ME
asked by: Saul Y
Expert Reply:
If you are looking for an axle and hub combo that has a hub face of 89" and a spring center of 74" then we do have a few options for you. We have both idler hubs and hub and drum assemblies both of which come with either an EZ lube cap or a standard grease cap.
Electric Brakes Standard Cap - # 35545E-ST-89
Electric Brakes EZ Lube Cap - # e43SR
Idler Hub Standard Cap - # 35545I-ST-89
Idler Hub EZ Lube Cap - # 35545I-EZ-89
All of these alone are rated for 3,500 lbs and features a 5 on 4-1/2" bolt pattern. I have linked some videos for you to check out as well.
Products Referenced in This Question
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs
- Shop: Dust Cap Driver Tool - Small - for 1.986" Grease Caps
- Shop: Brake Adjustment Spoon for Drum Brakes
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Q&A: Correct Replacement Castle Nut, Cotter Pin, and Washer for Trailer with 1" Round Spindle
- Q&A: Torque Specs for Axle Spindle Nut, Suspension Hanger Bolts, and Lug Nuts for Trailer
- Video: Redline Dust Cap Driver Tool Review
- Video: Dexter Trailer Axle Beam w/ Standard Spindles - 3,500 lbs Installation
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T3584F-8974 Review
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Search Results: 25580
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: Seal With Dimensions to Replace 171255UC
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: dust cap
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Shop: Brake Controller
- Shop: Gooseneck Hitch