Fit Kit Needed for Thule Evo Clamp Feet on a 2013 Toyota Tundra

Question

Question:

Hi. I need to know what fit kit is a match with Thule feet for my wingbars I need the fit kit for my toyota tundra 4w double cab 2013

asked by: Edgar

0

Expert Reply:

The Fit Kit # TH145182 is what you need for the Evo Clamp Feet # TH710501 for the 60" WingBars # TH711520 or # TH711500 on your 2013 Toyota Tundra.

expert reply by: Jon G

0

click to enlarge

Answer 1

The Rhino Rack fit kits will not work with Thule feet like what you have. Since Thule does not have a roof rack for your 2017 Nissan Titan XD confirmed as a fit your best option is a Rhino Rack roof rack part numbers #RRVA150B-2, #RRRLKVA, and #DK468…

view full answer...

Answer 2

Yes, all other components for the TracRac CapRac Ladder Rack, #TH29200XT, can be removed while leaving the swivel brackets in place. I have included a snapshot of the installation guide to show how the rack corner attaches to the swivel bracket. All…

view full answer...

Answer 3

Thule changed their square bars when the redesigned their roof racks. The square bars now attach via a channel on the bottom of the bar and the old feet used to grab around the bar instead. So to install a square bar Thule roof rack on your 2017…

view full answer...

Answer 4

Unlike some of the other roof rack manufacturers like Thule and Yakima Rola does not offer their racks in several pieces so that you can piece together parts of one rack to fit another vehicle. If you instead wanted a rack solution that would more…

view full answer...

Answer 5

To install two of the Thule Hullavators part #TH898 you'd want a roof rack with longer crossbars to allow the two to fit next to each other like the 60 inch crossbar Thule WingBar Evo roof rack part numbers #TH711520, #TH710501, and #TH145182.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

Answer 12

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...