Are Shanks from Different Weight Distribution Systems Interchangeable
Question:
I have a Pro Series shank on my old hitch 2”. Will this shank work with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 6,000 lbs GTW, 600 lbs TW Code: EQ37061ET, bolt hole spacing and shank width of 2”
asked by: JIm K
Expert Reply:
The shank parts of most weight distribution hitches use standardized hole sizing and spacing so the shank from one brand of WD system will work with the head assembly from another brand.
You do want to verify though that the weight capacities are the same. If your Pro Series shank were to be, just for example, rated for 1200-lbs of tongue weight (TW) such as # 63911, but your new system has a higher weight rating then you'd need to get another shank of the appropriate weight capacity.
All of our WD shank parts are displayed on the linked page.
You also want to make sure that the shank you use has the right amount of rise or drop to allow the hitched trailer to be level.
Products Referenced in This Question
Pro Series Weight Distribution Shank - 12" - 12,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Pro Series
more information >
Product Page this Question was Asked From
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 8 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 270682
- Q&A: Will the Curt Welded Weight Distribution Shanks C17123 or C17122 Reduce Trailer Hitch Capacity
- Q&A: Could Curt Shank # C17123 be Used with Ram 1500 and Fastway E2 System
- Q&A: Can Curt Weight Distribution Shank # C17123 Work with Husky WD System
- Q&A: Is Curt Shank C17123 Similar to Husky Shank 30857
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Video: Bright Way Trailer Breakaway Kits Replacement 12V 5 Ah Battery Review
- Video: Review of Gen-Y Hitch Torsion Weight Distribution 3" Shank - GY92RR
- Search Results: fastway e2 shanks
- Search Results: 3 inch shank
- Search Results: 3 shank
- Shop: Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
- Shop: ProPride 3P Weight Distribution Hitch w/ Sway Control for 3" Receivers - 14K GTW, 1.4K TW
- Shop: Gen-Y Torsion Weight Distribution Shank - 3" Hitches - 7" Drop/Rise - 2,400 lbs TW
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
- Q&A: Can Different Brand Shanks be Used with Most Weight Distribution Systems
- Search Results: andersen hitch
- Shop: Trailer Hitch
- Shop: Suspension Enhancement
- Video: Review of Gen-Y Hitch Sway Control Plate - GY33YR
- Search Results: lift blocks
- Q&A: 5th Wheel Hitch With Maximum Height for Most Trailer-to-Truck Bed Rail Clearance
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Search Results: hitch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Accessories and Parts
