Fresh Water Drain Valve With 3/8" Diameter MPT Thread

Question

Question:

My fresh water drain valve has a 3/8 npt only thread, can I find a exact replacement? I have ordered from you the camco 3/8 and 1/2 in. combination fresh water drain valve but the one that is being replaced has a 3/8 in. NPT stem. The longer stem on the replacement valve will make the drain hole not line up - can I find a exact replacement drain valve that has only 3/8 in. stem?

asked by: Carl B

0

Expert Reply:

There is a drain valve for you that will work; the Camco RV Drain Valve for 1/2" or 3/8" Diameter Drain Hose - Male NPT Thread # CAM22243 has, as the title suggests, a 3/8" diameter male NPT thread so it will work for you.

expert reply by: Kyle S

0

Answer 1

The Camco RV Drain Valve #CAM22243 is a 2-piece item. If you refer to the linked photo you will see it is composed of a threaded base part that will fit both 1/2-inch and 3/8-inch RV drain hoses and a handle part that inserts into the hollow cylinder…

view full answer...

Answer 2

The Camco RV Drain Valve #CAM22243 is threaded so it will not plug in, you will need to screw it in. The valve has 1/2 inch and 3/8 inch diameter male NPT threads and is for use with vinyl tubing. I've added a link to a video review for you to…

view full answer...

Answer 3

When installing the Camco RV Drain Valve w Flange #CAM22223 you would not need to use sealant as long as you use the proper size tubing. Either 1/2 inch or 3/8 inch tubing.

view full answer...

Answer 4

We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…

view full answer...

Answer 5

There is a drop leg made specifically for Lippert power jacks such as #LC285318. It is #LC405217.

view full answer...

Answer 6

The Lippert Electric Trailer Jack #LC285318 that you referenced features an inner tube diameter of 2 inches. We do have a nice selection of jack feet that are compatible with this jack. The Husky Brute Super Foot Fold-Up Jack Foot #HT31610 will fit…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

view full answer...

Answer 11

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 12

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Fresh Water Drain Valve With 3/8" Diameter MPT Thread

Product Page this Question was Asked From

Continue Researching