Is Sealant Required to Install the Camco RV Drain Valve w Flange # CAM22223

Question

Question:

what type of sealent do I use to replace valve on my rv.

asked by: Mikr

0

Expert Reply:

When installing the Camco RV Drain Valve w Flange # CAM22223 you would not need to use sealant as long as you use the proper size tubing. Either 1/2 inch or 3/8 inch tubing.

expert reply by: Jameson C

0

Answer 1

The Camco RV Drain Valve #CAM22243 is a 2-piece item. If you refer to the linked photo you will see it is composed of a threaded base part that will fit both 1/2-inch and 3/8-inch RV drain hoses and a handle part that inserts into the hollow cylinder…

view full answer...

Answer 2

The Camco RV Drain Valve #CAM22243 is threaded so it will not plug in, you will need to screw it in. The valve has 1/2 inch and 3/8 inch diameter male NPT threads and is for use with vinyl tubing. I've added a link to a video review for you to…

view full answer...

Answer 3

There is a drain valve for you that will work; the Camco RV Drain Valve for 1/2" or 3/8" Diameter Drain Hose - Male NPT Thread #CAM22243 has, as the title suggests, a 3/8" diameter male NPT thread so it will work for you.

view full answer...

Answer 4

From the base of the flange on the Camco RV Drain Valve #CAM22223 to the edge of the 3/8" barb thread measures 1-7/8". You can reference the attached photo for a demonstration.

view full answer...

Answer 5

The only difference between the Valterra Universal Barbed Drain Valve #A01-2025VP and the Camco RV Drain Valve - Barbed #CAM22223 is the manufacturer. Apart from that, these are the same drain valves that each have 1/2" and 3/8" diameter…

view full answer...

Answer 6

The Camco RV Drain Valve w Flange for 1/2" or 3/8" Diameter Drain Hose - Barb Thread #CAM22223 has a flange measurement is 1 7/8 inch diameter and the measurement of the holes center on center is 1 7/16 inches.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

view full answer...

Answer 11

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 12

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Is Sealant Required to Install the Camco RV Drain Valve w Flange # CAM22223

Product Page this Question was Asked From

Continue Researching