How Tight Should the Nuts be on Roadmaster Quiet Hitch RM-061

Question

Question:

What is the torque spec for the nuts as referenced in the video?

asked by: Steve M

0

Expert Reply:

Both initial nuts, the ones closest to the bar, as well as the jam nuts, for the Roadmaster Quiet Hitch # RM-061 will need to be torqued to 23 foot pounds.

expert reply by: Michael H

0

Answer 1

If you were to go with the either the Custer Wireless LED Tow Bar Light 4-Way #LIW-LDTL or 7-Way #LIW-LDTL-7B I recommend getting 2 of these. That will allow you to have one in the cab charging while using the other one. As they have an expected…

view full answer...

Answer 2

I checked the owner's manual for a 2022 Jeep Grand Cherokee WL and there was no mention of the Mopar Flat Tow Wiring Harness therefore this is not required. That said, you will need a base plate kit, safety cables, tow bar, wiring harness, and…

view full answer...

Answer 3

I am happy to help you with the components needed to flat tow a 2020 Jeep Cherokee Trailhawk. A complete flat tow system includes a base plate, tow bar, tow bar wiring, safety cables, braking system and possibly a high low adapter. For the base…

view full answer...

Answer 4

The first thing you'll need to flat tow your 2020 Jeep Cherokee Trailhawk is a base plate kit confirmed as a fit for your vehicle. For that I recommend the Roadmaster Direct Connect kit part #RM-521451-5 as it's easy to connect to and also…

view full answer...

Answer 5

The part you are referring to (Mopar's 68321424AB) was indeed a fix for certain models and years of Jeep Cherokee that were experiencing the dreaded "death wobble", but your 2021 Jeep Cherokee Trailhawk does not fall under these years.…

view full answer...

Answer 6

We have everything needed to flat tow your new 2020 Jeep Cherokee Trailhawk behind your RV with all 4 wheels on the ground. You are going to need a base plate kit, a tow bar, safety cables, a lighting solution, and a supplemental braking system to…

view full answer...

Answer 7

Absolutely! In order to flat tow your 2020 Jeep Cherokee Trailhawk behind a motorhome you will need a base plate kit, a tow bar, safety cables, a lighting solution, a supplemental braking system, and most likely a high-low adapter. I will quickly…

view full answer...

Answer 8

Yes, the diode kit #RM-15267 is confirmed to fit your 2016 Lincoln MKX. Depending on how handy you are I'd say the installation is between 4-6 hours. I did attach an installation video on a 2015 Jeep Cherokee which won't be exactly the same…

view full answer...

Answer 9

You can flat tow your 2015 Lincoln MKX with all 4 wheels on the ground. This information is located in the recreational towing section of the vehicle owner's manual, page 221. There are 5 major components needed to flat tow a vehicle: base…

view full answer...

Answer 10

There is a Blue Ox flat tow set up for your 2023 Jeep Grand Cherokee WL (the new body style) with tow hooks. Here are the parts you'll need, which I verified with Blue Ox: - Base Plate: Blue Ox Base Plate Kit #BLU68CR - Tow Bar: Blue Ox Alpha 2…

view full answer...

Answer 11

Thankfully in recent years the Mopar flat towing wiring kit you mentioned is no longer required for flat towing Jeep vehicles like the 2021 Jeep Cherokee Trailhawk. They were able to fix the need for the harness. We have the other parts needed to…

view full answer...

Answer 12

We have to recommend you stick with what the manufacturer recommends for flat towing your 2020 Jeep Grand Cherokee. Otherwise you run the very high risk of damaging the vehicle when flat towing it. Disconnecting the battery will reset your stereo…

view full answer...

How Tight Should the Nuts be on Roadmaster Quiet Hitch RM-061

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching