Westin HDX Drop Hitch Step Review Video

For your 2015 Mercedes Sprinter we have the Aries Running Boards part #AA86ZB as a confirmed fit that would work well. Then for a wider rear step that was designed to fit a hitch we have the Westin HDX Drop Hitch Step part #W98TD.

While the HitchMate TireStep #HE4040 will work on the rear dually tires on your 2000 Ford F-350 cab and chassis, it will not work on the front wheels and tires since the wheel protrudes out past the tire. We do have the Folding Step Stool #PT36NJ…

To mount the Go Power solar panel like #34282182 to the Rhino-Rack crossbars you would need to adjust the crossbars to the correct width for your panel. Then you can use the Truck Rack T-Slot Fit Kit for Malone Kayak Carriers #MPG8287 or Crossbar…

I went out to the warehouse and measured the single unit #TL11001 of the Pin Locks #TLS9500 that you referenced and found the width to be 1-7/16" but to the rubber grommet measured 1-1/4". If you need 1-1/8" of space then these will…

Out of our available locking hitch pins, the etrailer, Roadmaster, InfiniteRule, Demco, and Blue Ox locks are made in the USA. Assuming you have a 2" hitch I recommend the etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush -…

The channel on the Rhino Rack Roof Track, part #RRRTV148 is 0.86 inches (a little less than 7/8 inches) by 0.19 inches (a little less than 3/16ths inch). I've included a diagram showing these dimensions. The upper channel is about 5/8 inches…

The tracks of the Rhino Rack Roof Rack System part #Y02-500B are 1-1/2 inches wide by 1/2 inches tall. The length of the tracks is 63 inches. The feet height for this is 3 inches which is the distance from the top of the tracks to the bottom of the…

The width of the C channel that connects the 54 inch Rhino-Rack Vortex Crossbar to the foot is 1 inch and the width of the opening is 1/2 inch. The depth of the channel is 5/8 inch.

The square blocks included with Rhino-Rack track adapter kit #RRT-FK3 are 0.71 inches long, 0.51 inches wide, and 0.12 inches thick.

Here are the 2 different mounting options for installing the Batwing and Foxwing Awning Relocation Kit #RR31102. You can change the orientation of the brackets so that the awning will either hang higher or lower depending on your application.

The first thing you'll need to flat tow your 2020 Jeep Cherokee Trailhawk is a base plate kit confirmed as a fit for your vehicle. For that I recommend the Roadmaster Direct Connect kit part #RM-521451-5 as it's easy to connect to and also…

We have everything needed to flat tow your new 2020 Jeep Cherokee Trailhawk behind your RV with all 4 wheels on the ground. You are going to need a base plate kit, a tow bar, safety cables, a lighting solution, and a supplemental braking system to…