Correct Trailer Wiring Harness Confirmed to Fit a 2018 Chrysler Pacifica Hybrid Limited

Question

Question:

Hi: According an answer posted on your site by one of your experts the following harness will fit a 2018 Chrysler Pacifica Hybrid Limited: "For wiring you will want to use the Curt T-Connector # C56332 which has been confirmed to fit your Pacifica hybrid as well." Yet when I go to order one and put in this vehicle I received a message that this connector will not work with the 2018 Chrysler Pacifica Hybrid Limited. Which is it? Thanks

asked by: Lou T

0

Expert Reply:

You are correct that the Curt # C56332 does not fit a 2018 Chrysler Pacifica. The correct Curt wiring for your van is # C56322. I'm guessing the error was made because of how close the part numbers are to each other.

With that being said I recommend using the Tekonsha wiring, part # 118712, that's also confirmed to fit your Pacifica. We usually find the Tekonsha wiring harnesses to be of better quality than the Curt products.

If you don't already have a hitch Curt offers a Class III, part # C13383. It's the only Class III we have that's confirmed to fit the Hybrid model. Then you can use our ball mount kit, part # 989900, which includes everything else you need to tow a trailer with your Chrysler.

expert reply by: Charles S

0

Answer 1

A 4-pole wiring harness that is a confirmed fit for your 2017 Chrysler Pacifica Hybrid is the Curt #C56322. I checked with Curt to be sure this was a fit for the Hybrid version of your vehicle. I've added a link to a video review of this product…

view full answer...

Answer 2

We have both 1-1/4-inch Class II and 2-inch Class III hitches confirmed to fit the 2018 Chrysler Pacifica Hybrid that are shown on the linked page. Both Class II hitch #C12180 and Class III hitch #C13383 will require temporary removal and…

view full answer...

Answer 3

The Curt hitch part #C12180 that you referenced does fit your 2020 Chrysler Pacifica Hybrid and does not require any additional components to install. With that said since you have a 2 inch hitch bike rack the part #C13383 would be a better option as…

view full answer...

Answer 4

There is a hitch that is a fit for your 2018 Chrysler Pacifica Hybrid Limited, the Curt #C13383. This is a Class III hitch with a 2" receiver, 400 lb tongue weight capacity and 4,000 lb towing capacity. To add a 4-flat wiring harness you would…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...