Does Andersen Ultimate Fifth Wheel Hitch # AM3200 Fit Industry Standard Rails Directly

Question

Question:

Hi, I am removing my Pullrite Superglide hitch and I would like to install a Andersen Ultimate 5th wheel hitch on Industry Standard rails. I am not sure what I need in order to make this work.

asked by: Mark M

0

Expert Reply:

If you have a set of industry standard rails in the bed of your truck all you'll need is the Andersen Ultimate part # AM3200 which fit the rails and will work as a fifth wheel hitch.

expert reply by: Jameson C

0

Answer 1

We have the Andersen Ultimate Fifth Wheel Connection part #AM3200 which is the correct adapter to fit the industry standard fifth wheel rails you have. Reese hitches like what you have, and nearly all other fifth wheel hitch manufacturers, make their…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 6

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 9

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Answer 10

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 11

Hey Luis, for your 2018 Ford F-350 that doesn't have the OEM pucks you would want the B and W Turnoverball hitch part #BWGNRK1116 that is a confirmed fit for your truck. I really like the B and W gooseneck hitches as they are known to be the…

view full answer...

Answer 12

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Does Andersen Ultimate Fifth Wheel Hitch # AM3200 Fit Industry Standard Rails Directly

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching