Roof Cargo Basket Recommendation that Has Spare Wheel Carrier

Question

Question:

Is there a tire mount available for the Curt roof basket C18115. Thanks

asked by: George V

0

Expert Reply:

I have a similar solution I can recommend for you, but we do not have a spare tire mount for the Curt Cargo Basket part # C18115 that you referenced. Instead you would need the Yakima cargo basket part # Y07070 with the spare tire carrier # Y07076.

expert reply by: Jameson C

0

Answer 1

view full answer...

Answer 2

I do have an option for you to install the Rhino-Rack Pioneer Platform Roof Tray on a 2017 Audi Q7 but not the way you described as you can't mix and match parts nor is there a direct mount option. There is also a platform size restriction for…

view full answer...

Answer 3

There is not a locking device that comes with the Rhino-Rack Spare Tire Carrier #RSWH. That said, depending on if the wheel has any type of gap/hole/spoke in it you may be able to lock it to your carrier with a cable lock such as the etrailer 10'…

view full answer...

Answer 4

It is a smart idea to check, and I did verify for you with Rhino-Rack that yes, the mounting brackets are included with the Rhino-Rack folding ladder: - Folding Ladder for Rhino-Rack Pioneer Platform Racks #RRRAFL I have added a photo as well that we…

view full answer...

Answer 5

I will answer the car wash question first. Rack manufacturers will say do not go through a car wash with a roof rack on your vehicle. Have I taken my vehicle with a roof rack through a car wash before, yes. It was brushless and my rack was fine…

view full answer...

Answer 6

Yes! For a ladder mount on your Rhino-Rack Pioneer Platform like the #RR42115BF, you need the Rhino-Rack Folding Ladder Brackets for Pioneer Platform Rack #RRRUFLB. This bracket allows you to carry 1 of the Rhino-Rack Folding Ladders #RRRAFL. The…

view full answer...

Answer 7

The mounting hardware of the Rhino Rack Universal Pioneer Platform part #RR42115BF is adjustable and can install between basically any of the slats so it can accommodate a narrower side rail setup like you have.

view full answer...

Answer 8

There is an option to mount the Rhino-Rack Pioneer Platform rack to the crossbars on your 2016 Toyota Tundra, and you will simply need one of the following, depending on the size you want. - 48" Long x 38" Wide: Rhino-Rack Universal Pioneer…

view full answer...

Answer 9

I have a solution for you. I reached out to Rhino-Rack, and they could not confirm for sure that the mounting brackets of the Folding Ladder for Rhino-Rack Pioneer Platform Racks - Aluminum #RRRAFL-RUFLB will be able to fit the channels on your…

view full answer...

Answer 10

Yes! The two accessory bars that come with the medium Yakima OffGrid Roof Cargo Basket - Steel - 44" Long x 40" Wide - 165 lbs #Y07138 allow you to mount the Yakima JayLow Kayak Carrier w/ Tie-Downs - J-Style or Post Style #Y04073. The bars…

view full answer...

Answer 11

It is recommended that the Yakima OffGrid Roof Cargo Basket #Y07138 use four of the Yakima Same Key System Lock Cores, which you can get with the (SKS) Lock Cores (QTY 4) #Y07204. These cores will install into each of the four mounts that secure the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...