Best Trailer Hitch for 2013 Buick Verano

Question

Question:

I am looking for a hitch for above buick verano 2013, u have 2 diff ones ?? Which one can I use? I want to trail a 4x8 harbor freight trailer. Thanks

asked by: Dave

0

Expert Reply:

If you do not have the Turbo and Dual Exhaust models I would go with the Curt Trailer Hitch Receiver # C11282 mainly because according to our website the install difficulty is easier on this one than the Curt Trailer Hitch Receiver # C11282. They both have the receiver opening of 1-1/4" x 1-1/4" and the weight rating of 200lbs TW and 2000lbs GTW. You will also need the Draw-Tite Drawbar for 1-1/4" Hitches # 3593 rated at 2000lbs and the Pin and Clip # PC2. If you are looking for a hitch ball, the 2" Hitch Ball # 19258 the best choice.

You will also need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56288. It quickly and easily installs a 4-way trailer connector on your Buick Verano with this custom harness. T-connector plugs directly into existing wiring.

This custom-fit T-connector plugs into your Buick Verano's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the trunk floor coverings and rear scuff panel, and pull back on the trunk liner to access these connection points. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.

expert reply by: Timothy G

0

Answer 1

The Curt Trailer Hitch #C11117 will require drilling to install on a 1991 Chevy Camaro. There are two holes that need to be drilled with a 9/16" drill bit in order to secure the hitch. Please keep in mind that this hitch does NOT fit models…

view full answer...

Answer 2

Yes, the cross tube of the Curt Hitch part #C11282 that you referenced will be hidden when installed on a Verano like your 2015 Buick Verano. Check out the picture I attached that shows this hitch installed on a Verano similar to yours.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Best Trailer Hitch for 2013 Buick Verano

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching