Horse Trailer Rear Door Hinge and Spring Latch Availability

Question

Question:

Will this part work on my 97 Exiss Horse trailer ?? Also looking for spring latches for the tack compartment and window and door seals if they exist.

asked by: Tabitha

0

Expert Reply:

Thanks for the pictures of your horse trailer's rear door. The part # 2212 will work as a replacement for the hinges that you have.

We have spring latches too like the part # SL716SS as well but do not have door seals.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The base of the #SL716 Spring latch to the center line of the pin measures exactly 13/16 of an inch, as you can see in the diagram I have edited for you.

view full answer...

Answer 2

I went out to the warehouse to measure the Bolt-On Zinc Spring Latch Item #SL716 for you. With the pin pulled all the way out (spring fully compressed) it measures approximately 4-7/8 inches from the outside of the bracket to the end of the loop.…

view full answer...

Answer 3

I went and pulled a Bolt-On Stainless Steel Spring Latch #SL716SS from our warehouse and measure the dimension you are looking for and found it to be 1-7/8 inches. See the pic I attached, I added the dimension to the picture you submitted

view full answer...

Answer 4

I have attached for you below a dimensional drawing of the Square Corner Hinge with Reverse Bracket part #PLR2212-SSP provided from the manufacturer. This is the only dimensional drawing we offer for this product but if there is something else you…

view full answer...

Answer 5

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

view full answer...

Answer 6

I do have an option for you but we only offer the H-Channel for Enclosed Trailers part #36281-955 is one size, 93-1/2" long x 2" tall x 1-1/8" deep. That said, we do offer a C-Channel for Enclosed Trailers in 93-1/2" long x…

view full answer...

Answer 7

Yes, a 235/85 R16 tire is designed to fit a trailer wheel with a 6" or 6-1/2" wide wheel. For a premium 235/85 R16 tire option, I recommend using the Westlake ST235/85R16 Radial Trailer Tire part #LHWL410 as all Westlake brand tires come…

view full answer...

Answer 8

The part of the Buyers Products Door Check and Hold Back #337BM2395AA11 with the spring needs to be mounted to your door frame (at the top) while the arm without the spring needs to be mounted to your door. I have attached a photo showing the…

view full answer...

Answer 9

The differences from trailer wheels, like the Dexstar Conventional Steel Wheel with Offset #AM20504 that you referenced, and vehicle wheels, like GM OEM wheels, can vary based on a lot of things. Trailer wheels are specifically designed to be used…

view full answer...

Answer 10

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 11

To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…

view full answer...

Answer 12

Hey Eric! Are you wanting to change from disc brakes to electric hub and drums, or are you just wanting to replace the rotors themselves? Traditionally 10" brakes are only compatible with up to 15" wheels but if yours have been working just…

view full answer...

Horse Trailer Rear Door Hinge and Spring Latch Availability

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching