Mounting Rhino Rack Bars on a 2018 GMC Canyon

Question

Question:

I already have Rhino Aero Bars (4 of) which have been installed on a 200 series Landcruiser. I would like to use these bars if possible so what feet and mounting would I need to get?

asked by: Darren S

0

Expert Reply:

The Rhino Rack bars will all install using a clamp system that connects to your vehicle around its door jamb.

For your vehicle, I recommend the custom length bars, part # RR93GR for the Crew Cab variant and part # RR28GR for the Extended Cab version. This will give you a factory look on the vehicle, while providing improved functionality through its channel mounts and bars.

Both of these kits are all-in-one kits and require no additional purchases or foot packs to install.

expert reply by: Jacob W

0

Darren S.

12/5/2017

I already have Rhino Aero Bars (4 of) which have been installed on a 200 series Landcruiser. I would like to use these bars if possible so what feet and mounting would I need to get?

Reply

Jacob W.

12/5/2017

To adapt the bars from your Toyota Land Cruiser to your 2018 GMC Canyon, you'll need the following kit: Rhino Rack 2500 Series Legs for Vortex Aero Bars, part # RRRLKVA Rhino Rack Custom DK Fit Kit, part # DK330 This will complete a single pair of bars. If you have four total, you'll want two of everything above.

Reply

Answer 1

The best roof rack for your 2016 GMC Canyon Crew Cab is the Rhino-Rack RS 2500 because it is the best overall value, durable and quiet; the correct part for your Canyon is the following: -Rhino-Rack ROC25 Roof Rack #RR93GR The #RR93GR roof rack uses…

view full answer...

Answer 2

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 7

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 8

When flat towing a vehicle you do not want your steering wheel to lock as this would cause your tires to drag any time you try to turn while towing. Placing your 2022 Chevy Colorado's transmission in neutral and then placing the ignition into ACC…

view full answer...

Answer 9

There is no plug-in wiring adapter for a brake controller on a 2019 Chevy Colorado; most brake controllers such as the Prodigy P3 #90195 will need to be hardwired into the vehicle. For this you can use the Replacement Brake Control Plug-In Harness…

view full answer...

Answer 10

Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.

view full answer...

Answer 11

The only set of airbag that are available for a 2019 Chevrolet Colorado with the diesel engine at this time are the Firestone Sport-Rite Air Helper Springs part #F2587. This system is a direct fit so no drilling is required. They have a 3,000 lb…

view full answer...

Answer 12

The main components needed to flat tow your 2019 Chevy Colorado are a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you below: Tow Bar: Roadmaster Falcon All Terrain, Non-Binding…

view full answer...