Will the Draw-Tite Trailer Hitch Receiver # 75278 Fit a 2008 Chevrolet Uplander LS MiniShort

Question

Question:

2008 Chevy Uplander LS MiniShort Will this hitch # 75278 work for the 113 inch wheelbase 2008 Chevy Uplander? This is NOT the extended version. Thank you,

asked by: Jon C

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 75278 is a custom fit receiver and is confirmed to fit your 2008 Chevrolet Uplander LS MiniShort with the 113 inch wheelbase.

If you let me know what you will be using the trailer hitch for I can make some recommendations for you.

I have also attached an installation video on a similar Uplander as well as the installation instructions that you can use as a reference.

expert reply by: Jon G

0

Answer 1

Draw-Tite Class III hitch #75278 is a confirmed fit on the 2008 Chevy Uplander with 113-inch wheelbase. I verified this with Draw-Tite. This particular hitch fits all styles of this vehicle year/make/model. An installation video for this item is…

view full answer...

Answer 2

For your 2008 Chevy Uplander, I recommend the Draw-Tite Class III Max Frame Receiver Hitch #75278. This Class III hitch is confirmed to fit your vehicle and has more than enough capacity to pull your 1,000 pound trailer with inflatables. It will…

view full answer...

Answer 3

To figure out if your 2009 Pontiac Montana SV6 has the short or long wheel base would be to measure from the center of the rear wheel to the center of the front wheel, or you can call your local GM dealer with your VIN and they should be able to look…

view full answer...

Answer 4

For your 2009 Chevy Uplander we have the Draw Tite Hitch part #75278 as a confirmed fit that would work well. It installs easily, is mostly hidden, and has great towing capacities. Then for trailer wiring the Tekonsha kit part #118396 would be a…

view full answer...

Answer 5

The bolt sizes that come with the Draw Tite hitch #36408 which fits your 2008 Chevy Equinox is M12 for the vertical brackets that attach to the outside of the frame. It's not uncommon to need to tap out rusty weld nuts on vehicles with a few…

view full answer...

Answer 6

We get this question quite a bit and the issue is really that the threads end up with quite a bit of corrosion and dirt which prevents the bolt from threading in. I attached a couple help articles that cover cleaning out weld nuts for you to check…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Will the Draw-Tite Trailer Hitch Receiver # 75278 Fit a 2008 Chevrolet Uplander LS MiniShort

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching