Roller Bunk and Mounting Bracket Recommendation for a 10 Foot Inflatable Boat on a Jet Ski Trailer

Question

Question:

i have a jetski trailer and i want to make some ajustment to fit a 10 foot inflatable boat i dont know what brackets i need and bunk boards please give me some inf so i can order the parts thank you

asked by: Gerald

0

Expert Reply:

I recommend the Boat Trailer Deluxe Roller Bunk, # DL21741, that you have referenced. These roller bunks can be mounted vertically or horizontally directly to the trailer or by using bracket # DL21742. Since the boat you wish to carry is 10 feet long and these rollers are 5 feet long each, I recommend two sets. You will also need a total of 8 brackets to mount both sets. We recommend using stainless or galvanized hardware to mount the rollers and brackets because of their corrosion resistance.

expert reply by: Michael H

0

Answer 1

The USA-made Malone MicroSport Jon Boat Trailer #MPG461JB has the 13-foot boat length and 900-lb weight capacity to accommodate your inflatable. The detail photo included shows the rear bunk board mounts which can be slid along the rear rail to the…

view full answer...

Answer 2

To add bunk boards to the Malone MicroSport Trailer #MPG460G you'll want 2 of the Bunk Kit #MPG561 which actually installs on the crossbars. Since the Malone trailer frames are different you'll need to source U-Bolts to install the CE Smith…

view full answer...

Answer 3

I have another option for you, but you are correct that the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 can only handle boats up to 14' long. You instead would need to use the Malone LowBed MicroSport Trailer #MPG464-LB…

view full answer...

Answer 4

For your Saturn Inflatable boat the Malone EcoLight Sport Trailer part #MAL73FR is going to be your best option. It's appropriately sized for your Saturn and will work really well. Since your boat has a hull on it the bunks of the trailer will…

view full answer...

Answer 5

I can certainly understand not wanting to have to connect 2 five-foot carpeted bunk rails like #CE27820 to get the 10 foot bunks you need. We don't offer them in the 10' length because the shipping costs would be more expensive than the bunks…

view full answer...

Answer 6

It sounds like your trailer had a wishbone harness and/or could have multiple ground wires. On a 4-Way trailer end, the one covered pin is the ground. Next to that is the running light pin. The running light pin on some connectors will have more than…

view full answer...

Answer 7

Since you have six wires it sounds to me like you have a double ground and a left and a right side tail light wire. If this is the case you could use a wishbone harness like the 20 ft. Wishbone 4-Way Trailer Wiring Harness with 30" Ground Wire,…

view full answer...

Answer 8

To transport your 13' inflatable boat, I recommend the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks item #CE48870. This trailer works with boats up to 14' long and has a 800 lbs capacity. Since your boat has a flat bottom you…

view full answer...

Answer 9

For a 15 foot boat the best trailer option is the CE Smith Multi Sport Plus Boat #CE48870 which is the best for your size boat due to the bunk length, is galvanized like you are wanting and could easily be loaded and unloaded like you are wanting. I…

view full answer...

Answer 10

The Yakima Rack and Roll, part #Y08106 is capable of towing your 14 foot inflatable boat. You will want to purchase longer 78 inch Crossbars, part #Y00411 to better accommodate your boat. You'll need some system to tie down the boat, and I…

view full answer...

Answer 11

To carry kayaks with the CE Smith Multi Sport Plus Boat and Kayak Carrier part #CE48870 you will need to have the bunks run from left to right. There's no way to carry them with the bunks running from front to back unless you only were planning…

view full answer...

Answer 12

To convert your Malone MicroSport Trailer #MPG461GU to carry your Bote Rover SUP/Micro skiff you will need a couple parts to use it with launching at the boat ramp. First you will need the Malone MicroSport to LowBed Trailer Conversion Support Tubes…

view full answer...

Roller Bunk and Mounting Bracket Recommendation for a 10 Foot Inflatable Boat on a Jet Ski Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching