Routing Trailer Wiring Harness # 118482 Power Wire to the Battery on a 2011 Toyota Camry
Question:
In running the power wire, what issues exist under my 2011 Camry? Things to avoid? Best ways to secure?
asked by: Warren
Expert Reply:
When routing the power wire to the battery in trailer wiring harness, # 118482, you will want to avoid any areas that may pinch the wire, causing it to break. Any moving components like the suspension can potentially pinch the wire, so avoid moving parts.
You will also want to avoid parts that get hot enough to melt the wire. Exhaust components as an example get very hot and can melt the insulation. However, on the 2011 Toyota Camry, the battery should be in the trunk and you will not have to worry about moving parts or heat.
If the battery where mounted in the front under the hood, there are a couple of methods you can use to safely route the wire. The easiest is to follow along an existing wiring harness and use zip ties to secure the wire.
Another method is to run the wire inside the vehicle. This can be tricky and may require additional wire and the removal of internal trim pieces in order to keep the wire hidden.
Some people route the wire through the vehicle frame if possible. This would involve starting at the front of the vehicle where the wire would end up, and routing a rigid wire, like a coat hanger down the frame rail to the back. You would then tie the red wire to it and pull the rigid wire back through. Not all vehicles have a frame rail that would allow this method.
I have included a link to a video showing a typical installation of this wiring harness on a 2011 Toyota Camry. This vehicle has the battery in the back.
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: Curt Trailer Hitch Installation - 2020 Toyota Camry
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Video: Choosing the Right Trailer Wiring
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: 25580
- Search Results: 44649
- Q&A: Seal With Dimensions to Replace 171255UC
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Article: How to Choose the Right Trailer Hitch Class
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: dust cap
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Video: etrailer Class III Trailer Hitch Installation - 2024 Subaru Crosstrek
- Article: My Trailer Hitch Doesn't Fit
- Shop: Fifth Wheel Hitch
- Article: Brake Controller Installation: Starting from Scratch